diff --git a/Makefile b/Makefile
index 90752ef542a400532e23186deff3af180b6ef179..4b586d52a682fdba37d51c89bc1e889daa1fb949 100644
--- a/Makefile
+++ b/Makefile
@@ -1,4 +1,4 @@
-VERSION := v1.2.0-rc1
+VERSION := v1.2.0
# Name of this service/application
SERVICE_NAME := redis-operator
diff --git a/README.md b/README.md
index 653e4ba9e965280f69c17dbbb9a26629e09a9ed3..d795caca08dd7560ff79da625352ce0cbbf44675 100644
--- a/README.md
+++ b/README.md
@@ -7,7 +7,10 @@ Redis Operator creates/configures/manages redis-failovers atop Kubernetes.
## Requirements
-Redis Operator is meant to be run on Kubernetes 1.19+.
+Kubernetes version: 1.21 or higher
+Redis version: 6 or higher
+
+Redis operator is being tested against kubernetes 1.22 1.23 1.24 and redis 6
All dependencies have been vendored, so there's no need to any additional download.
## Operator deployment on Kubernetes
@@ -30,7 +33,8 @@ helm install redis-operator redis-operator/redis-operator
Helm chart only manage the creation of CRD in the first install. In order to update the CRD you will need to apply directly.
```
-kubectl apply -f https://raw.githubusercontent.com/spotahome/redis-operator/master/manifests/databases.spotahome.com_redisfailovers.yaml
+REDIS_OPERATOR_VERSION=v1.2.0
+kubectl replace -f https://raw.githubusercontent.com/spotahome/redis-operator/${REDIS_OPERATOR_VERSION}/manifests/databases.spotahome.com_redisfailovers.yaml
```
```
@@ -41,8 +45,9 @@ helm upgrade redis-operator redis-operator/redis-operator
To create the operator, you can directly create it with kubectl:
```
-kubectl apply -f https://raw.githubusercontent.com/spotahome/redis-operator/master/manifests/databases.spotahome.com_redisfailovers.yaml
-kubectl apply -f https://raw.githubusercontent.com/spotahome/redis-operator/master/example/operator/all-redis-operator-resources.yaml
+REDIS_OPERATOR_VERSION=v1.2.0
+kubectl create -f https://raw.githubusercontent.com/spotahome/redis-operator/${REDIS_OPERATOR_VERSION}/manifests/databases.spotahome.com_redisfailovers.yaml
+kubectl apply -f https://raw.githubusercontent.com/spotahome/redis-operator/${REDIS_OPERATOR_VERSION}/example/operator/all-redis-operator-resources.yaml
```
This will create a deployment named `redisoperator`.
@@ -93,7 +98,8 @@ Once the operator is deployed inside a Kubernetes cluster, a new API will be acc
In order to deploy a new redis-failover a [specification](example/redisfailover/basic.yaml) has to be created:
```
-kubectl create -f https://raw.githubusercontent.com/spotahome/redis-operator/master/example/redisfailover/basic.yaml
+REDIS_OPERATOR_VERSION=v1.2.0
+kubectl create -f https://raw.githubusercontent.com/spotahome/redis-operator/${REDIS_OPERATOR_VERSION}/example/redisfailover/basic.yaml
```
This redis-failover will be managed by the operator, resulting in the following elements created inside Kubernetes:
@@ -149,7 +155,7 @@ This behavior is configurable, creating a configmap and indicating to use it. An
By default Kubernetes will run containers as the user specified in the Dockerfile (or the root user if not specified), this is not always desirable.
If you need the containers to run as a specific user (or provide any other PodSecurityContext options) then you can specify a custom `securityContext` in the
-`redisfailover` object. See the [SecurityContext example file](example/redisfailover/security-context.yaml) for an example. Keys available under securityContext are detailed [here](https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.14/#podsecuritycontext-v1-core)
+`redisfailover` object. See the [SecurityContext example file](example/redisfailover/security-context.yaml) for an example. You can visit kubernetes documentation for detailed docs about [security context](https://kubernetes.io/docs/tasks/configure-pod-container/security-context/)
### Custom containerSecurityContext at container level
diff --git a/charts/redisoperator/Chart.yaml b/charts/redisoperator/Chart.yaml
index 46cf6e419b0230c62aae106bf1d20aa06b53bf37..70ca3e356a43c422e03abc3330ccaece6892bf12 100644
--- a/charts/redisoperator/Chart.yaml
+++ b/charts/redisoperator/Chart.yaml
@@ -1,10 +1,10 @@
annotations:
category: Redis Operator
-appVersion: 1.1.1
+appVersion: 1.2.0
apiVersion: v1
description: A Helm chart for the Spotahome Redis Operator
name: redis-operator
-version: 3.1.6
+version: 3.2.0
home: https://github.com/spotahome/redis-operator
keywords:
- "golang"
diff --git a/charts/redisoperator/crds/databases.spotahome.com_redisfailovers.yaml b/charts/redisoperator/crds/databases.spotahome.com_redisfailovers.yaml
index f6bbe4d31d3d8eac5fd719bcbdac9134c9ddd293..4739b126599c0e552e2ed3cfbfb4a975a11a25e1 100644
--- a/charts/redisoperator/crds/databases.spotahome.com_redisfailovers.yaml
+++ b/charts/redisoperator/crds/databases.spotahome.com_redisfailovers.yaml
@@ -2705,112 +2705,357 @@ spec:
- name
type: object
type: array
- hostNetwork:
- type: boolean
- image:
- type: string
- imagePullPolicy:
- description: PullPolicy describes a policy for if/when to pull
- a container image
- type: string
- imagePullSecrets:
+ extraVolumeMounts:
items:
- description: LocalObjectReference contains enough information
- to let you locate the referenced object inside the same namespace.
+ description: VolumeMount describes a mounting of a Volume within
+ a container.
properties:
+ mountPath:
+ description: Path within the container at which the volume
+ should be mounted. Must not contain ':'.
+ type: string
+ mountPropagation:
+ description: mountPropagation determines how mounts are
+ propagated from the host to container and the other way
+ around. When not set, MountPropagationNone is used. This
+ field is beta in 1.10.
+ type: string
name:
- description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
- TODO: Add other useful fields. apiVersion, kind, uid?'
+ description: This must match the Name of a Volume.
+ type: string
+ readOnly:
+ description: Mounted read-only if true, read-write otherwise
+ (false or unspecified). Defaults to false.
+ type: boolean
+ subPath:
+ description: Path within the volume from which the container's
+ volume should be mounted. Defaults to "" (volume's root).
+ type: string
+ subPathExpr:
+ description: Expanded path within the volume from which
+ the container's volume should be mounted. Behaves similarly
+ to SubPath but environment variable references $(VAR_NAME)
+ are expanded using the container's environment. Defaults
+ to "" (volume's root). SubPathExpr and SubPath are mutually
+ exclusive.
type: string
+ required:
+ - mountPath
+ - name
type: object
type: array
- initContainers:
+ extraVolumes:
items:
- description: A single application container that you want to
- run within a pod.
+ description: Volume represents a named volume in a pod that
+ may be accessed by any container in the pod.
properties:
- args:
- description: 'Arguments to the entrypoint. The container
- image''s CMD is used if this is not provided. Variable
- references $(VAR_NAME) are expanded using the container''s
- environment. If a variable cannot be resolved, the reference
- in the input string will be unchanged. Double $$ are reduced
- to a single $, which allows for escaping the $(VAR_NAME)
- syntax: i.e. "$$(VAR_NAME)" will produce the string literal
- "$(VAR_NAME)". Escaped references will never be expanded,
- regardless of whether the variable exists or not. Cannot
- be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
- items:
- type: string
- type: array
- command:
- description: 'Entrypoint array. Not executed within a shell.
- The container image''s ENTRYPOINT is used if this is not
- provided. Variable references $(VAR_NAME) are expanded
- using the container''s environment. If a variable cannot
- be resolved, the reference in the input string will be
- unchanged. Double $$ are reduced to a single $, which
- allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)"
- will produce the string literal "$(VAR_NAME)". Escaped
- references will never be expanded, regardless of whether
- the variable exists or not. Cannot be updated. More info:
- https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
- items:
- type: string
- type: array
- env:
- description: List of environment variables to set in the
- container. Cannot be updated.
- items:
- description: EnvVar represents an environment variable
- present in a Container.
- properties:
- name:
- description: Name of the environment variable. Must
- be a C_IDENTIFIER.
+ awsElasticBlockStore:
+ description: 'awsElasticBlockStore represents an AWS Disk
+ resource that is attached to a kubelet''s host machine
+ and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
+ properties:
+ fsType:
+ description: 'fsType is the filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ partition:
+ description: 'partition is the partition in the volume
+ that you want to mount. If omitted, the default is
+ to mount by volume name. Examples: For volume /dev/sda1,
+ you specify the partition as "1". Similarly, the volume
+ partition for /dev/sda is "0" (or you can leave the
+ property empty).'
+ format: int32
+ type: integer
+ readOnly:
+ description: 'readOnly value true will force the readOnly
+ setting in VolumeMounts. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
+ type: boolean
+ volumeID:
+ description: 'volumeID is unique ID of the persistent
+ disk resource in AWS (Amazon EBS volume). More info:
+ https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
+ type: string
+ required:
+ - volumeID
+ type: object
+ azureDisk:
+ description: azureDisk represents an Azure Data Disk mount
+ on the host and bind mount to the pod.
+ properties:
+ cachingMode:
+ description: 'cachingMode is the Host Caching mode:
+ None, Read Only, Read Write.'
+ type: string
+ diskName:
+ description: diskName is the Name of the data disk in
+ the blob storage
+ type: string
+ diskURI:
+ description: diskURI is the URI of data disk in the
+ blob storage
+ type: string
+ fsType:
+ description: fsType is Filesystem type to mount. Must
+ be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ kind:
+ description: 'kind expected values are Shared: multiple
+ blob disks per storage account Dedicated: single
+ blob disk per storage account Managed: azure managed
+ data disk (only in managed availability set). defaults
+ to shared'
+ type: string
+ readOnly:
+ description: readOnly Defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ required:
+ - diskName
+ - diskURI
+ type: object
+ azureFile:
+ description: azureFile represents an Azure File Service
+ mount on the host and bind mount to the pod.
+ properties:
+ readOnly:
+ description: readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ secretName:
+ description: secretName is the name of secret that
+ contains Azure Storage Account Name and Key
+ type: string
+ shareName:
+ description: shareName is the azure share Name
+ type: string
+ required:
+ - secretName
+ - shareName
+ type: object
+ cephfs:
+ description: cephFS represents a Ceph FS mount on the host
+ that shares a pod's lifetime
+ properties:
+ monitors:
+ description: 'monitors is Required: Monitors is a collection
+ of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ items:
type: string
- value:
- description: 'Variable references $(VAR_NAME) are
- expanded using the previously defined environment
- variables in the container and any service environment
- variables. If a variable cannot be resolved, the
- reference in the input string will be unchanged.
- Double $$ are reduced to a single $, which allows
- for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)"
- will produce the string literal "$(VAR_NAME)". Escaped
- references will never be expanded, regardless of
- whether the variable exists or not. Defaults to
- "".'
+ type: array
+ path:
+ description: 'path is Optional: Used as the mounted
+ root, rather than the full Ceph tree, default is /'
+ type: string
+ readOnly:
+ description: 'readOnly is Optional: Defaults to false
+ (read/write). ReadOnly here will force the ReadOnly
+ setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ type: boolean
+ secretFile:
+ description: 'secretFile is Optional: SecretFile is
+ the path to key ring for User, default is /etc/ceph/user.secret
+ More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ type: string
+ secretRef:
+ description: 'secretRef is Optional: SecretRef is reference
+ to the authentication secret for User, default is
+ empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
+ type: object
+ user:
+ description: 'user is optional: User is the rados user
+ name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ type: string
+ required:
+ - monitors
+ type: object
+ cinder:
+ description: 'cinder represents a cinder volume attached
+ and mounted on kubelets host machine. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
+ properties:
+ fsType:
+ description: 'fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Examples: "ext4", "xfs", "ntfs". Implicitly
+ inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
+ type: string
+ readOnly:
+ description: 'readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
+ type: boolean
+ secretRef:
+ description: 'secretRef is optional: points to a secret
+ object containing parameters used to connect to OpenStack.'
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
+ type: object
+ volumeID:
+ description: 'volumeID used to identify the volume in
+ cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
+ type: string
+ required:
+ - volumeID
+ type: object
+ configMap:
+ description: configMap represents a configMap that should
+ populate this volume
+ properties:
+ defaultMode:
+ description: 'defaultMode is optional: mode bits used
+ to set permissions on created files by default. Must
+ be an octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal values for mode
+ bits. Defaults to 0644. Directories within the path
+ are not affected by this setting. This might be in
+ conflict with other options that affect the file mode,
+ like fsGroup, and the result can be other mode bits
+ set.'
+ format: int32
+ type: integer
+ items:
+ description: items if unspecified, each key-value pair
+ in the Data field of the referenced ConfigMap will
+ be projected into the volume as a file whose name
+ is the key and content is the value. If specified,
+ the listed keys will be projected into the specified
+ paths, and unlisted keys will not be present. If a
+ key is specified which is not present in the ConfigMap,
+ the volume setup will error unless it is marked optional.
+ Paths must be relative and may not contain the '..'
+ path or start with '..'.
+ items:
+ description: Maps a string key to a path within a
+ volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode bits used
+ to set permissions on this file. Must be an
+ octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires decimal values
+ for mode bits. If not specified, the volume
+ defaultMode will be used. This might be in conflict
+ with other options that affect the file mode,
+ like fsGroup, and the result can be other mode
+ bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path of the
+ file to map the key to. May not be an absolute
+ path. May not contain the path element '..'.
+ May not start with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind, uid?'
+ type: string
+ optional:
+ description: optional specify whether the ConfigMap
+ or its keys must be defined
+ type: boolean
+ type: object
+ csi:
+ description: csi (Container Storage Interface) represents
+ ephemeral storage that is handled by certain external
+ CSI drivers (Beta feature).
+ properties:
+ driver:
+ description: driver is the name of the CSI driver that
+ handles this volume. Consult with your admin for the
+ correct name as registered in the cluster.
+ type: string
+ fsType:
+ description: fsType to mount. Ex. "ext4", "xfs", "ntfs".
+ If not provided, the empty value is passed to the
+ associated CSI driver which will determine the default
+ filesystem to apply.
+ type: string
+ nodePublishSecretRef:
+ description: nodePublishSecretRef is a reference to
+ the secret object containing sensitive information
+ to pass to the CSI driver to complete the CSI NodePublishVolume
+ and NodeUnpublishVolume calls. This field is optional,
+ and may be empty if no secret is required. If the
+ secret object contains more than one secret, all secret
+ references are passed.
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
+ type: object
+ readOnly:
+ description: readOnly specifies a read-only configuration
+ for the volume. Defaults to false (read/write).
+ type: boolean
+ volumeAttributes:
+ additionalProperties:
type: string
- valueFrom:
- description: Source for the environment variable's
- value. Cannot be used if value is not empty.
+ description: volumeAttributes stores driver-specific
+ properties that are passed to the CSI driver. Consult
+ your driver's documentation for supported values.
+ type: object
+ required:
+ - driver
+ type: object
+ downwardAPI:
+ description: downwardAPI represents downward API about the
+ pod that should populate this volume
+ properties:
+ defaultMode:
+ description: 'Optional: mode bits to use on created
+ files by default. Must be a Optional: mode bits used
+ to set permissions on created files by default. Must
+ be an octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal values for mode
+ bits. Defaults to 0644. Directories within the path
+ are not affected by this setting. This might be in
+ conflict with other options that affect the file mode,
+ like fsGroup, and the result can be other mode bits
+ set.'
+ format: int32
+ type: integer
+ items:
+ description: Items is a list of downward API volume
+ file
+ items:
+ description: DownwardAPIVolumeFile represents information
+ to create the file containing the pod field
properties:
- configMapKeyRef:
- description: Selects a key of a ConfigMap.
- properties:
- key:
- description: The key to select.
- type: string
- name:
- description: 'Name of the referent. More info:
- https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
- TODO: Add other useful fields. apiVersion,
- kind, uid?'
- type: string
- optional:
- description: Specify whether the ConfigMap
- or its key must be defined
- type: boolean
- required:
- - key
- type: object
fieldRef:
- description: 'Selects a field of the pod: supports
- metadata.name, metadata.namespace, `metadata.labels[''<KEY>'']`,
- `metadata.annotations[''<KEY>'']`, spec.nodeName,
- spec.serviceAccountName, status.hostIP, status.podIP,
- status.podIPs.'
+ description: 'Required: Selects a field of the
+ pod: only annotations, labels, name and namespace
+ are supported.'
properties:
apiVersion:
description: Version of the schema the FieldPath
@@ -2823,11 +3068,30 @@ spec:
required:
- fieldPath
type: object
+ mode:
+ description: 'Optional: mode bits used to set
+ permissions on this file, must be an octal value
+ between 0000 and 0777 or a decimal value between
+ 0 and 511. YAML accepts both octal and decimal
+ values, JSON requires decimal values for mode
+ bits. If not specified, the volume defaultMode
+ will be used. This might be in conflict with
+ other options that affect the file mode, like
+ fsGroup, and the result can be other mode bits
+ set.'
+ format: int32
+ type: integer
+ path:
+ description: 'Required: Path is the relative
+ path name of the file to be created. Must not
+ be absolute or contain the ''..'' path. Must
+ be utf-8 encoded. The first item of the relative
+ path must not start with ''..'''
+ type: string
resourceFieldRef:
description: 'Selects a resource of the container:
only resources limits and requests (limits.cpu,
- limits.memory, limits.ephemeral-storage, requests.cpu,
- requests.memory and requests.ephemeral-storage)
+ limits.memory, requests.cpu and requests.memory)
are currently supported.'
properties:
containerName:
@@ -2848,546 +3112,1875 @@ spec:
required:
- resource
type: object
- secretKeyRef:
- description: Selects a key of a secret in the
- pod's namespace
- properties:
- key:
- description: The key of the secret to select
- from. Must be a valid secret key.
- type: string
- name:
- description: 'Name of the referent. More info:
- https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
- TODO: Add other useful fields. apiVersion,
- kind, uid?'
- type: string
- optional:
- description: Specify whether the Secret or
- its key must be defined
- type: boolean
- required:
- - key
- type: object
- type: object
- required:
- - name
- type: object
- type: array
- envFrom:
- description: List of sources to populate environment variables
- in the container. The keys defined within a source must
- be a C_IDENTIFIER. All invalid keys will be reported as
- an event when the container is starting. When a key exists
- in multiple sources, the value associated with the last
- source will take precedence. Values defined by an Env
- with a duplicate key will take precedence. Cannot be updated.
- items:
- description: EnvFromSource represents the source of a
- set of ConfigMaps
- properties:
- configMapRef:
- description: The ConfigMap to select from
- properties:
- name:
- description: 'Name of the referent. More info:
- https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
- TODO: Add other useful fields. apiVersion, kind,
- uid?'
- type: string
- optional:
- description: Specify whether the ConfigMap must
- be defined
- type: boolean
- type: object
- prefix:
- description: An optional identifier to prepend to
- each key in the ConfigMap. Must be a C_IDENTIFIER.
- type: string
- secretRef:
- description: The Secret to select from
- properties:
- name:
- description: 'Name of the referent. More info:
- https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
- TODO: Add other useful fields. apiVersion, kind,
- uid?'
- type: string
- optional:
- description: Specify whether the Secret must be
- defined
- type: boolean
+ required:
+ - path
type: object
- type: object
- type: array
- image:
- description: 'Container image name. More info: https://kubernetes.io/docs/concepts/containers/images
- This field is optional to allow higher level config management
- to default or override container images in workload controllers
- like Deployments and StatefulSets.'
- type: string
- imagePullPolicy:
- description: 'Image pull policy. One of Always, Never, IfNotPresent.
- Defaults to Always if :latest tag is specified, or IfNotPresent
- otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
- type: string
- lifecycle:
- description: Actions that the management system should take
- in response to container lifecycle events. Cannot be updated.
+ type: array
+ type: object
+ emptyDir:
+ description: 'emptyDir represents a temporary directory
+ that shares a pod''s lifetime. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir'
properties:
- postStart:
- description: 'PostStart is called immediately after
- a container is created. If the handler fails, the
- container is terminated and restarted according to
- its restart policy. Other management of the container
- blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
+ medium:
+ description: 'medium represents what type of storage
+ medium should back this directory. The default is
+ "" which means to use the node''s default medium.
+ Must be an empty string (default) or Memory. More
+ info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir'
+ type: string
+ sizeLimit:
+ anyOf:
+ - type: integer
+ - type: string
+ description: 'sizeLimit is the total amount of local
+ storage required for this EmptyDir volume. The size
+ limit is also applicable for memory medium. The maximum
+ usage on memory medium EmptyDir would be the minimum
+ value between the SizeLimit specified here and the
+ sum of memory limits of all containers in a pod. The
+ default is nil which means that the limit is undefined.
+ More info: http://kubernetes.io/docs/user-guide/volumes#emptydir'
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ type: object
+ ephemeral:
+ description: "ephemeral represents a volume that is handled
+ by a cluster storage driver. The volume's lifecycle is
+ tied to the pod that defines it - it will be created before
+ the pod starts, and deleted when the pod is removed. \n
+ Use this if: a) the volume is only needed while the pod
+ runs, b) features of normal volumes like restoring from
+ snapshot or capacity tracking are needed, c) the storage
+ driver is specified through a storage class, and d) the
+ storage driver supports dynamic volume provisioning through
+ \ a PersistentVolumeClaim (see EphemeralVolumeSource
+ for more information on the connection between this
+ volume type and PersistentVolumeClaim). \n Use PersistentVolumeClaim
+ or one of the vendor-specific APIs for volumes that persist
+ for longer than the lifecycle of an individual pod. \n
+ Use CSI for light-weight local ephemeral volumes if the
+ CSI driver is meant to be used that way - see the documentation
+ of the driver for more information. \n A pod can use both
+ types of ephemeral volumes and persistent volumes at the
+ same time."
+ properties:
+ volumeClaimTemplate:
+ description: "Will be used to create a stand-alone PVC
+ to provision the volume. The pod in which this EphemeralVolumeSource
+ is embedded will be the owner of the PVC, i.e. the
+ PVC will be deleted together with the pod. The name
+ of the PVC will be `<pod name>-<volume name>` where
+ `<volume name>` is the name from the `PodSpec.Volumes`
+ array entry. Pod validation will reject the pod if
+ the concatenated name is not valid for a PVC (for
+ example, too long). \n An existing PVC with that name
+ that is not owned by the pod will *not* be used for
+ the pod to avoid using an unrelated volume by mistake.
+ Starting the pod is then blocked until the unrelated
+ PVC is removed. If such a pre-created PVC is meant
+ to be used by the pod, the PVC has to updated with
+ an owner reference to the pod once the pod exists.
+ Normally this should not be necessary, but it may
+ be useful when manually reconstructing a broken cluster.
+ \n This field is read-only and no changes will be
+ made by Kubernetes to the PVC after it has been created.
+ \n Required, must not be nil."
properties:
- exec:
- description: Exec specifies the action to take.
+ metadata:
+ description: May contain labels and annotations
+ that will be copied into the PVC when creating
+ it. No other fields are allowed and will be rejected
+ during validation.
+ type: object
+ spec:
+ description: The specification for the PersistentVolumeClaim.
+ The entire content is copied unchanged into the
+ PVC that gets created from this template. The
+ same fields as in a PersistentVolumeClaim are
+ also valid here.
properties:
- command:
- description: Command is the command line to
- execute inside the container, the working
- directory for the command is root ('/') in
- the container's filesystem. The command is
- simply exec'd, it is not run inside a shell,
- so traditional shell instructions ('|', etc)
- won't work. To use a shell, you need to explicitly
- call out to that shell. Exit status of 0 is
- treated as live/healthy and non-zero is unhealthy.
+ accessModes:
+ description: 'accessModes contains the desired
+ access modes the volume should have. More
+ info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
items:
type: string
type: array
- type: object
- httpGet:
- description: HTTPGet specifies the http request
- to perform.
- properties:
- host:
- description: Host name to connect to, defaults
- to the pod IP. You probably want to set "Host"
- in httpHeaders instead.
- type: string
- httpHeaders:
- description: Custom headers to set in the request.
- HTTP allows repeated headers.
- items:
- description: HTTPHeader describes a custom
- header to be used in HTTP probes
- properties:
- name:
- description: The header field name
- type: string
- value:
- description: The header field value
+ dataSource:
+ description: 'dataSource field can be used to
+ specify either: * An existing VolumeSnapshot
+ object (snapshot.storage.k8s.io/VolumeSnapshot)
+ * An existing PVC (PersistentVolumeClaim)
+ If the provisioner or an external controller
+ can support the specified data source, it
+ will create a new volume based on the contents
+ of the specified data source. If the AnyVolumeDataSource
+ feature gate is enabled, this field will always
+ have the same contents as the DataSourceRef
+ field.'
+ properties:
+ apiGroup:
+ description: APIGroup is the group for the
+ resource being referenced. If APIGroup
+ is not specified, the specified Kind must
+ be in the core API group. For any other
+ third-party types, APIGroup is required.
+ type: string
+ kind:
+ description: Kind is the type of resource
+ being referenced
+ type: string
+ name:
+ description: Name is the name of resource
+ being referenced
+ type: string
+ required:
+ - kind
+ - name
+ type: object
+ dataSourceRef:
+ description: 'dataSourceRef specifies the object
+ from which to populate the volume with data,
+ if a non-empty volume is desired. This may
+ be any local object from a non-empty API group
+ (non core object) or a PersistentVolumeClaim
+ object. When this field is specified, volume
+ binding will only succeed if the type of the
+ specified object matches some installed volume
+ populator or dynamic provisioner. This field
+ will replace the functionality of the DataSource
+ field and as such if both fields are non-empty,
+ they must have the same value. For backwards
+ compatibility, both fields (DataSource and
+ DataSourceRef) will be set to the same value
+ automatically if one of them is empty and
+ the other is non-empty. There are two important
+ differences between DataSource and DataSourceRef:
+ * While DataSource only allows two specific
+ types of objects, DataSourceRef allows any
+ non-core object, as well as PersistentVolumeClaim
+ objects. * While DataSource ignores disallowed
+ values (dropping them), DataSourceRef preserves
+ all values, and generates an error if a disallowed
+ value is specified. (Beta) Using this field
+ requires the AnyVolumeDataSource feature gate
+ to be enabled.'
+ properties:
+ apiGroup:
+ description: APIGroup is the group for the
+ resource being referenced. If APIGroup
+ is not specified, the specified Kind must
+ be in the core API group. For any other
+ third-party types, APIGroup is required.
+ type: string
+ kind:
+ description: Kind is the type of resource
+ being referenced
+ type: string
+ name:
+ description: Name is the name of resource
+ being referenced
+ type: string
+ required:
+ - kind
+ - name
+ type: object
+ resources:
+ description: 'resources represents the minimum
+ resources the volume should have. If RecoverVolumeExpansionFailure
+ feature is enabled users are allowed to specify
+ resource requirements that are lower than
+ previous value but must still be higher than
+ capacity recorded in the status field of the
+ claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
+ properties:
+ limits:
+ additionalProperties:
+ anyOf:
+ - type: integer
+ - type: string
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ description: 'Limits describes the maximum
+ amount of compute resources allowed. More
+ info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ type: object
+ requests:
+ additionalProperties:
+ anyOf:
+ - type: integer
+ - type: string
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ description: 'Requests describes the minimum
+ amount of compute resources required.
+ If Requests is omitted for a container,
+ it defaults to Limits if that is explicitly
+ specified, otherwise to an implementation-defined
+ value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ type: object
+ type: object
+ selector:
+ description: selector is a label query over
+ volumes to consider for binding.
+ properties:
+ matchExpressions:
+ description: matchExpressions is a list
+ of label selector requirements. The requirements
+ are ANDed.
+ items:
+ description: A label selector requirement
+ is a selector that contains values,
+ a key, and an operator that relates
+ the key and values.
+ properties:
+ key:
+ description: key is the label key
+ that the selector applies to.
+ type: string
+ operator:
+ description: operator represents a
+ key's relationship to a set of values.
+ Valid operators are In, NotIn, Exists
+ and DoesNotExist.
+ type: string
+ values:
+ description: values is an array of
+ string values. If the operator is
+ In or NotIn, the values array must
+ be non-empty. If the operator is
+ Exists or DoesNotExist, the values
+ array must be empty. This array
+ is replaced during a strategic merge
+ patch.
+ items:
+ type: string
+ type: array
+ required:
+ - key
+ - operator
+ type: object
+ type: array
+ matchLabels:
+ additionalProperties:
type: string
- required:
- - name
- - value
- type: object
- type: array
- path:
- description: Path to access on the HTTP server.
+ description: matchLabels is a map of {key,value}
+ pairs. A single {key,value} in the matchLabels
+ map is equivalent to an element of matchExpressions,
+ whose key field is "key", the operator
+ is "In", and the values array contains
+ only "value". The requirements are ANDed.
+ type: object
+ type: object
+ storageClassName:
+ description: 'storageClassName is the name of
+ the StorageClass required by the claim. More
+ info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Name or number of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- scheme:
- description: Scheme to use for connecting to
- the host. Defaults to HTTP.
+ volumeMode:
+ description: volumeMode defines what type of
+ volume is required by the claim. Value of
+ Filesystem is implied when not included in
+ claim spec.
type: string
- required:
- - port
- type: object
- tcpSocket:
- description: Deprecated. TCPSocket is NOT supported
- as a LifecycleHandler and kept for the backward
- compatibility. There are no validation of this
- field and lifecycle hooks will fail in runtime
- when tcp handler is specified.
- properties:
- host:
- description: 'Optional: Host name to connect
- to, defaults to the pod IP.'
+ volumeName:
+ description: volumeName is the binding reference
+ to the PersistentVolume backing this claim.
type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Number or name of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- required:
- - port
type: object
+ required:
+ - spec
type: object
- preStop:
- description: 'PreStop is called immediately before a
- container is terminated due to an API request or management
- event such as liveness/startup probe failure, preemption,
- resource contention, etc. The handler is not called
- if the container crashes or exits. The Pod''s termination
- grace period countdown begins before the PreStop hook
- is executed. Regardless of the outcome of the handler,
- the container will eventually terminate within the
- Pod''s termination grace period (unless delayed by
- finalizers). Other management of the container blocks
- until the hook completes or until the termination
- grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
+ type: object
+ fc:
+ description: fc represents a Fibre Channel resource that
+ is attached to a kubelet's host machine and then exposed
+ to the pod.
+ properties:
+ fsType:
+ description: 'fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified. TODO: how do we prevent
+ errors in the filesystem from compromising the machine'
+ type: string
+ lun:
+ description: 'lun is Optional: FC target lun number'
+ format: int32
+ type: integer
+ readOnly:
+ description: 'readOnly is Optional: Defaults to false
+ (read/write). ReadOnly here will force the ReadOnly
+ setting in VolumeMounts.'
+ type: boolean
+ targetWWNs:
+ description: 'targetWWNs is Optional: FC target worldwide
+ names (WWNs)'
+ items:
+ type: string
+ type: array
+ wwids:
+ description: 'wwids Optional: FC volume world wide identifiers
+ (wwids) Either wwids or combination of targetWWNs
+ and lun must be set, but not both simultaneously.'
+ items:
+ type: string
+ type: array
+ type: object
+ flexVolume:
+ description: flexVolume represents a generic volume resource
+ that is provisioned/attached using an exec based plugin.
+ properties:
+ driver:
+ description: driver is the name of the driver to use
+ for this volume.
+ type: string
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". The default filesystem
+ depends on FlexVolume script.
+ type: string
+ options:
+ additionalProperties:
+ type: string
+ description: 'options is Optional: this field holds
+ extra command options if any.'
+ type: object
+ readOnly:
+ description: 'readOnly is Optional: defaults to false
+ (read/write). ReadOnly here will force the ReadOnly
+ setting in VolumeMounts.'
+ type: boolean
+ secretRef:
+ description: 'secretRef is Optional: secretRef is reference
+ to the secret object containing sensitive information
+ to pass to the plugin scripts. This may be empty if
+ no secret object is specified. If the secret object
+ contains more than one secret, all secrets are passed
+ to the plugin scripts.'
properties:
- exec:
- description: Exec specifies the action to take.
- properties:
- command:
- description: Command is the command line to
- execute inside the container, the working
- directory for the command is root ('/') in
- the container's filesystem. The command is
- simply exec'd, it is not run inside a shell,
- so traditional shell instructions ('|', etc)
- won't work. To use a shell, you need to explicitly
- call out to that shell. Exit status of 0 is
- treated as live/healthy and non-zero is unhealthy.
- items:
- type: string
- type: array
- type: object
- httpGet:
- description: HTTPGet specifies the http request
- to perform.
- properties:
- host:
- description: Host name to connect to, defaults
- to the pod IP. You probably want to set "Host"
- in httpHeaders instead.
- type: string
- httpHeaders:
- description: Custom headers to set in the request.
- HTTP allows repeated headers.
- items:
- description: HTTPHeader describes a custom
- header to be used in HTTP probes
- properties:
- name:
- description: The header field name
- type: string
- value:
- description: The header field value
- type: string
- required:
- - name
- - value
- type: object
- type: array
- path:
- description: Path to access on the HTTP server.
- type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Name or number of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- scheme:
- description: Scheme to use for connecting to
- the host. Defaults to HTTP.
- type: string
- required:
- - port
- type: object
- tcpSocket:
- description: Deprecated. TCPSocket is NOT supported
- as a LifecycleHandler and kept for the backward
- compatibility. There are no validation of this
- field and lifecycle hooks will fail in runtime
- when tcp handler is specified.
- properties:
- host:
- description: 'Optional: Host name to connect
- to, defaults to the pod IP.'
- type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Number or name of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- required:
- - port
- type: object
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
type: object
+ required:
+ - driver
type: object
- livenessProbe:
- description: 'Periodic probe of container liveness. Container
- will be restarted if the probe fails. Cannot be updated.
- More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ flocker:
+ description: flocker represents a Flocker volume attached
+ to a kubelet's host machine. This depends on the Flocker
+ control service being running
properties:
- exec:
- description: Exec specifies the action to take.
- properties:
- command:
- description: Command is the command line to execute
- inside the container, the working directory for
- the command is root ('/') in the container's
- filesystem. The command is simply exec'd, it is
- not run inside a shell, so traditional shell instructions
- ('|', etc) won't work. To use a shell, you need
- to explicitly call out to that shell. Exit status
- of 0 is treated as live/healthy and non-zero is
- unhealthy.
- items:
- type: string
- type: array
- type: object
- failureThreshold:
- description: Minimum consecutive failures for the probe
- to be considered failed after having succeeded. Defaults
- to 3. Minimum value is 1.
+ datasetName:
+ description: datasetName is Name of the dataset stored
+ as metadata -> name on the dataset for Flocker should
+ be considered as deprecated
+ type: string
+ datasetUUID:
+ description: datasetUUID is the UUID of the dataset.
+ This is unique identifier of a Flocker dataset
+ type: string
+ type: object
+ gcePersistentDisk:
+ description: 'gcePersistentDisk represents a GCE Disk resource
+ that is attached to a kubelet''s host machine and then
+ exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
+ properties:
+ fsType:
+ description: 'fsType is filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ partition:
+ description: 'partition is the partition in the volume
+ that you want to mount. If omitted, the default is
+ to mount by volume name. Examples: For volume /dev/sda1,
+ you specify the partition as "1". Similarly, the volume
+ partition for /dev/sda is "0" (or you can leave the
+ property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
format: int32
type: integer
- grpc:
- description: GRPC specifies an action involving a GRPC
- port. This is a beta field and requires enabling GRPCContainerProbe
- feature gate.
+ pdName:
+ description: 'pdName is unique name of the PD resource
+ in GCE. Used to identify the disk in GCE. More info:
+ https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the ReadOnly
+ setting in VolumeMounts. Defaults to false. More info:
+ https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
+ type: boolean
+ required:
+ - pdName
+ type: object
+ gitRepo:
+ description: 'gitRepo represents a git repository at a particular
+ revision. DEPRECATED: GitRepo is deprecated. To provision
+ a container with a git repo, mount an EmptyDir into an
+ InitContainer that clones the repo using git, then mount
+ the EmptyDir into the Pod''s container.'
+ properties:
+ directory:
+ description: directory is the target directory name.
+ Must not contain or start with '..'. If '.' is supplied,
+ the volume directory will be the git repository. Otherwise,
+ if specified, the volume will contain the git repository
+ in the subdirectory with the given name.
+ type: string
+ repository:
+ description: repository is the URL
+ type: string
+ revision:
+ description: revision is the commit hash for the specified
+ revision.
+ type: string
+ required:
+ - repository
+ type: object
+ glusterfs:
+ description: 'glusterfs represents a Glusterfs mount on
+ the host that shares a pod''s lifetime. More info: https://examples.k8s.io/volumes/glusterfs/README.md'
+ properties:
+ endpoints:
+ description: 'endpoints is the endpoint name that details
+ Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
+ type: string
+ path:
+ description: 'path is the Glusterfs volume path. More
+ info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the Glusterfs
+ volume to be mounted with read-only permissions. Defaults
+ to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
+ type: boolean
+ required:
+ - endpoints
+ - path
+ type: object
+ hostPath:
+ description: 'hostPath represents a pre-existing file or
+ directory on the host machine that is directly exposed
+ to the container. This is generally used for system agents
+ or other privileged things that are allowed to see the
+ host machine. Most containers will NOT need this. More
+ info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
+ --- TODO(jonesdl) We need to restrict who can use host
+ directory mounts and who can/can not mount host directories
+ as read/write.'
+ properties:
+ path:
+ description: 'path of the directory on the host. If
+ the path is a symlink, it will follow the link to
+ the real path. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath'
+ type: string
+ type:
+ description: 'type for HostPath Volume Defaults to ""
+ More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath'
+ type: string
+ required:
+ - path
+ type: object
+ iscsi:
+ description: 'iscsi represents an ISCSI Disk resource that
+ is attached to a kubelet''s host machine and then exposed
+ to the pod. More info: https://examples.k8s.io/volumes/iscsi/README.md'
+ properties:
+ chapAuthDiscovery:
+ description: chapAuthDiscovery defines whether support
+ iSCSI Discovery CHAP authentication
+ type: boolean
+ chapAuthSession:
+ description: chapAuthSession defines whether support
+ iSCSI Session CHAP authentication
+ type: boolean
+ fsType:
+ description: 'fsType is the filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ initiatorName:
+ description: initiatorName is the custom iSCSI Initiator
+ Name. If initiatorName is specified with iscsiInterface
+ simultaneously, new iSCSI interface <target portal>:<volume
+ name> will be created for the connection.
+ type: string
+ iqn:
+ description: iqn is the target iSCSI Qualified Name.
+ type: string
+ iscsiInterface:
+ description: iscsiInterface is the interface Name that
+ uses an iSCSI transport. Defaults to 'default' (tcp).
+ type: string
+ lun:
+ description: lun represents iSCSI Target Lun number.
+ format: int32
+ type: integer
+ portals:
+ description: portals is the iSCSI Target Portal List.
+ The portal is either an IP or ip_addr:port if the
+ port is other than default (typically TCP ports 860
+ and 3260).
+ items:
+ type: string
+ type: array
+ readOnly:
+ description: readOnly here will force the ReadOnly setting
+ in VolumeMounts. Defaults to false.
+ type: boolean
+ secretRef:
+ description: secretRef is the CHAP Secret for iSCSI
+ target and initiator authentication
properties:
- port:
- description: Port number of the gRPC service. Number
- must be in the range 1 to 65535.
- format: int32
- type: integer
- service:
- description: "Service is the name of the service
- to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
- \n If this is not specified, the default behavior
- is defined by gRPC."
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- required:
- - port
type: object
- httpGet:
- description: HTTPGet specifies the http request to perform.
- properties:
- host:
- description: Host name to connect to, defaults to
- the pod IP. You probably want to set "Host" in
- httpHeaders instead.
- type: string
- httpHeaders:
- description: Custom headers to set in the request.
- HTTP allows repeated headers.
- items:
- description: HTTPHeader describes a custom header
- to be used in HTTP probes
+ targetPortal:
+ description: targetPortal is iSCSI Target Portal. The
+ Portal is either an IP or ip_addr:port if the port
+ is other than default (typically TCP ports 860 and
+ 3260).
+ type: string
+ required:
+ - iqn
+ - lun
+ - targetPortal
+ type: object
+ name:
+ description: 'name of the volume. Must be a DNS_LABEL and
+ unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
+ type: string
+ nfs:
+ description: 'nfs represents an NFS mount on the host that
+ shares a pod''s lifetime More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ properties:
+ path:
+ description: 'path that is exported by the NFS server.
+ More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the NFS export
+ to be mounted with read-only permissions. Defaults
+ to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ type: boolean
+ server:
+ description: 'server is the hostname or IP address of
+ the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ type: string
+ required:
+ - path
+ - server
+ type: object
+ persistentVolumeClaim:
+ description: 'persistentVolumeClaimVolumeSource represents
+ a reference to a PersistentVolumeClaim in the same namespace.
+ More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
+ properties:
+ claimName:
+ description: 'claimName is the name of a PersistentVolumeClaim
+ in the same namespace as the pod using this volume.
+ More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
+ type: string
+ readOnly:
+ description: readOnly Will force the ReadOnly setting
+ in VolumeMounts. Default false.
+ type: boolean
+ required:
+ - claimName
+ type: object
+ photonPersistentDisk:
+ description: photonPersistentDisk represents a PhotonController
+ persistent disk attached and mounted on kubelets host
+ machine
+ properties:
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ pdID:
+ description: pdID is the ID that identifies Photon Controller
+ persistent disk
+ type: string
+ required:
+ - pdID
+ type: object
+ portworxVolume:
+ description: portworxVolume represents a portworx volume
+ attached and mounted on kubelets host machine
+ properties:
+ fsType:
+ description: fSType represents the filesystem type to
+ mount Must be a filesystem type supported by the host
+ operating system. Ex. "ext4", "xfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ readOnly:
+ description: readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ volumeID:
+ description: volumeID uniquely identifies a Portworx
+ volume
+ type: string
+ required:
+ - volumeID
+ type: object
+ projected:
+ description: projected items for all in one resources secrets,
+ configmaps, and downward API
+ properties:
+ defaultMode:
+ description: defaultMode are the mode bits used to set
+ permissions on created files by default. Must be an
+ octal value between 0000 and 0777 or a decimal value
+ between 0 and 511. YAML accepts both octal and decimal
+ values, JSON requires decimal values for mode bits.
+ Directories within the path are not affected by this
+ setting. This might be in conflict with other options
+ that affect the file mode, like fsGroup, and the result
+ can be other mode bits set.
+ format: int32
+ type: integer
+ sources:
+ description: sources is the list of volume projections
+ items:
+ description: Projection that may be projected along
+ with other supported volume types
+ properties:
+ configMap:
+ description: configMap information about the configMap
+ data to project
properties:
+ items:
+ description: items if unspecified, each key-value
+ pair in the Data field of the referenced
+ ConfigMap will be projected into the volume
+ as a file whose name is the key and content
+ is the value. If specified, the listed keys
+ will be projected into the specified paths,
+ and unlisted keys will not be present. If
+ a key is specified which is not present
+ in the ConfigMap, the volume setup will
+ error unless it is marked optional. Paths
+ must be relative and may not contain the
+ '..' path or start with '..'.
+ items:
+ description: Maps a string key to a path
+ within a volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode
+ bits used to set permissions on this
+ file. Must be an octal value between
+ 0000 and 0777 or a decimal value between
+ 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires
+ decimal values for mode bits. If not
+ specified, the volume defaultMode
+ will be used. This might be in conflict
+ with other options that affect the
+ file mode, like fsGroup, and the result
+ can be other mode bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path
+ of the file to map the key to. May
+ not be an absolute path. May not contain
+ the path element '..'. May not start
+ with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
name:
- description: The header field name
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion,
+ kind, uid?'
type: string
- value:
- description: The header field value
+ optional:
+ description: optional specify whether the
+ ConfigMap or its keys must be defined
+ type: boolean
+ type: object
+ downwardAPI:
+ description: downwardAPI information about the
+ downwardAPI data to project
+ properties:
+ items:
+ description: Items is a list of DownwardAPIVolume
+ file
+ items:
+ description: DownwardAPIVolumeFile represents
+ information to create the file containing
+ the pod field
+ properties:
+ fieldRef:
+ description: 'Required: Selects a field
+ of the pod: only annotations, labels,
+ name and namespace are supported.'
+ properties:
+ apiVersion:
+ description: Version of the schema
+ the FieldPath is written in terms
+ of, defaults to "v1".
+ type: string
+ fieldPath:
+ description: Path of the field to
+ select in the specified API version.
+ type: string
+ required:
+ - fieldPath
+ type: object
+ mode:
+ description: 'Optional: mode bits used
+ to set permissions on this file, must
+ be an octal value between 0000 and
+ 0777 or a decimal value between 0
+ and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal
+ values for mode bits. If not specified,
+ the volume defaultMode will be used.
+ This might be in conflict with other
+ options that affect the file mode,
+ like fsGroup, and the result can be
+ other mode bits set.'
+ format: int32
+ type: integer
+ path:
+ description: 'Required: Path is the
+ relative path name of the file to
+ be created. Must not be absolute or
+ contain the ''..'' path. Must be utf-8
+ encoded. The first item of the relative
+ path must not start with ''..'''
+ type: string
+ resourceFieldRef:
+ description: 'Selects a resource of
+ the container: only resources limits
+ and requests (limits.cpu, limits.memory,
+ requests.cpu and requests.memory)
+ are currently supported.'
+ properties:
+ containerName:
+ description: 'Container name: required
+ for volumes, optional for env
+ vars'
+ type: string
+ divisor:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Specifies the output
+ format of the exposed resources,
+ defaults to "1"
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ resource:
+ description: 'Required: resource
+ to select'
+ type: string
+ required:
+ - resource
+ type: object
+ required:
+ - path
+ type: object
+ type: array
+ type: object
+ secret:
+ description: secret information about the secret
+ data to project
+ properties:
+ items:
+ description: items if unspecified, each key-value
+ pair in the Data field of the referenced
+ Secret will be projected into the volume
+ as a file whose name is the key and content
+ is the value. If specified, the listed keys
+ will be projected into the specified paths,
+ and unlisted keys will not be present. If
+ a key is specified which is not present
+ in the Secret, the volume setup will error
+ unless it is marked optional. Paths must
+ be relative and may not contain the '..'
+ path or start with '..'.
+ items:
+ description: Maps a string key to a path
+ within a volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode
+ bits used to set permissions on this
+ file. Must be an octal value between
+ 0000 and 0777 or a decimal value between
+ 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires
+ decimal values for mode bits. If not
+ specified, the volume defaultMode
+ will be used. This might be in conflict
+ with other options that affect the
+ file mode, like fsGroup, and the result
+ can be other mode bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path
+ of the file to map the key to. May
+ not be an absolute path. May not contain
+ the path element '..'. May not start
+ with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
+ name:
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion,
+ kind, uid?'
+ type: string
+ optional:
+ description: optional field specify whether
+ the Secret or its key must be defined
+ type: boolean
+ type: object
+ serviceAccountToken:
+ description: serviceAccountToken is information
+ about the serviceAccountToken data to project
+ properties:
+ audience:
+ description: audience is the intended audience
+ of the token. A recipient of a token must
+ identify itself with an identifier specified
+ in the audience of the token, and otherwise
+ should reject the token. The audience defaults
+ to the identifier of the apiserver.
+ type: string
+ expirationSeconds:
+ description: expirationSeconds is the requested
+ duration of validity of the service account
+ token. As the token approaches expiration,
+ the kubelet volume plugin will proactively
+ rotate the service account token. The kubelet
+ will start trying to rotate the token if
+ the token is older than 80 percent of its
+ time to live or if the token is older than
+ 24 hours.Defaults to 1 hour and must be
+ at least 10 minutes.
+ format: int64
+ type: integer
+ path:
+ description: path is the path relative to
+ the mount point of the file to project the
+ token into.
type: string
required:
- - name
- - value
+ - path
type: object
- type: array
- path:
- description: Path to access on the HTTP server.
+ type: object
+ type: array
+ type: object
+ quobyte:
+ description: quobyte represents a Quobyte mount on the host
+ that shares a pod's lifetime
+ properties:
+ group:
+ description: group to map volume access to Default is
+ no group
+ type: string
+ readOnly:
+ description: readOnly here will force the Quobyte volume
+ to be mounted with read-only permissions. Defaults
+ to false.
+ type: boolean
+ registry:
+ description: registry represents a single or multiple
+ Quobyte Registry services specified as a string as
+ host:port pair (multiple entries are separated with
+ commas) which acts as the central registry for volumes
+ type: string
+ tenant:
+ description: tenant owning the given Quobyte volume
+ in the Backend Used with dynamically provisioned Quobyte
+ volumes, value is set by the plugin
+ type: string
+ user:
+ description: user to map volume access to Defaults to
+ serivceaccount user
+ type: string
+ volume:
+ description: volume is a string that references an already
+ created Quobyte volume by name.
+ type: string
+ required:
+ - registry
+ - volume
+ type: object
+ rbd:
+ description: 'rbd represents a Rados Block Device mount
+ on the host that shares a pod''s lifetime. More info:
+ https://examples.k8s.io/volumes/rbd/README.md'
+ properties:
+ fsType:
+ description: 'fsType is the filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ image:
+ description: 'image is the rados image name. More info:
+ https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ keyring:
+ description: 'keyring is the path to key ring for RBDUser.
+ Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ monitors:
+ description: 'monitors is a collection of Ceph monitors.
+ More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ items:
+ type: string
+ type: array
+ pool:
+ description: 'pool is the rados pool name. Default is
+ rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the ReadOnly
+ setting in VolumeMounts. Defaults to false. More info:
+ https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: boolean
+ secretRef:
+ description: 'secretRef is name of the authentication
+ secret for RBDUser. If provided overrides keyring.
+ Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Name or number of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- scheme:
- description: Scheme to use for connecting to the
- host. Defaults to HTTP.
+ type: object
+ user:
+ description: 'user is the rados user name. Default is
+ admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ required:
+ - image
+ - monitors
+ type: object
+ scaleIO:
+ description: scaleIO represents a ScaleIO persistent volume
+ attached and mounted on Kubernetes nodes.
+ properties:
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Default is "xfs".
+ type: string
+ gateway:
+ description: gateway is the host address of the ScaleIO
+ API Gateway.
+ type: string
+ protectionDomain:
+ description: protectionDomain is the name of the ScaleIO
+ Protection Domain for the configured storage.
+ type: string
+ readOnly:
+ description: readOnly Defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ secretRef:
+ description: secretRef references to the secret for
+ ScaleIO user and other sensitive information. If this
+ is not provided, Login operation will fail.
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- required:
- - port
type: object
- initialDelaySeconds:
- description: 'Number of seconds after the container
- has started before liveness probes are initiated.
- More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
- format: int32
- type: integer
- periodSeconds:
- description: How often (in seconds) to perform the probe.
- Default to 10 seconds. Minimum value is 1.
- format: int32
- type: integer
- successThreshold:
- description: Minimum consecutive successes for the probe
- to be considered successful after having failed. Defaults
- to 1. Must be 1 for liveness and startup. Minimum
- value is 1.
+ sslEnabled:
+ description: sslEnabled Flag enable/disable SSL communication
+ with Gateway, default false
+ type: boolean
+ storageMode:
+ description: storageMode indicates whether the storage
+ for a volume should be ThickProvisioned or ThinProvisioned.
+ Default is ThinProvisioned.
+ type: string
+ storagePool:
+ description: storagePool is the ScaleIO Storage Pool
+ associated with the protection domain.
+ type: string
+ system:
+ description: system is the name of the storage system
+ as configured in ScaleIO.
+ type: string
+ volumeName:
+ description: volumeName is the name of a volume already
+ created in the ScaleIO system that is associated with
+ this volume source.
+ type: string
+ required:
+ - gateway
+ - secretRef
+ - system
+ type: object
+ secret:
+ description: 'secret represents a secret that should populate
+ this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
+ properties:
+ defaultMode:
+ description: 'defaultMode is Optional: mode bits used
+ to set permissions on created files by default. Must
+ be an octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal values for mode
+ bits. Defaults to 0644. Directories within the path
+ are not affected by this setting. This might be in
+ conflict with other options that affect the file mode,
+ like fsGroup, and the result can be other mode bits
+ set.'
format: int32
type: integer
- tcpSocket:
- description: TCPSocket specifies an action involving
- a TCP port.
+ items:
+ description: items If unspecified, each key-value pair
+ in the Data field of the referenced Secret will be
+ projected into the volume as a file whose name is
+ the key and content is the value. If specified, the
+ listed keys will be projected into the specified paths,
+ and unlisted keys will not be present. If a key is
+ specified which is not present in the Secret, the
+ volume setup will error unless it is marked optional.
+ Paths must be relative and may not contain the '..'
+ path or start with '..'.
+ items:
+ description: Maps a string key to a path within a
+ volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode bits used
+ to set permissions on this file. Must be an
+ octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires decimal values
+ for mode bits. If not specified, the volume
+ defaultMode will be used. This might be in conflict
+ with other options that affect the file mode,
+ like fsGroup, and the result can be other mode
+ bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path of the
+ file to map the key to. May not be an absolute
+ path. May not contain the path element '..'.
+ May not start with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
+ optional:
+ description: optional field specify whether the Secret
+ or its keys must be defined
+ type: boolean
+ secretName:
+ description: 'secretName is the name of the secret in
+ the pod''s namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
+ type: string
+ type: object
+ storageos:
+ description: storageOS represents a StorageOS volume attached
+ and mounted on Kubernetes nodes.
+ properties:
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ readOnly:
+ description: readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ secretRef:
+ description: secretRef specifies the secret to use for
+ obtaining the StorageOS API credentials. If not specified,
+ default values will be attempted.
properties:
- host:
- description: 'Optional: Host name to connect to,
- defaults to the pod IP.'
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Number or name of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- required:
- - port
type: object
- terminationGracePeriodSeconds:
- description: Optional duration in seconds the pod needs
- to terminate gracefully upon probe failure. The grace
- period is the duration in seconds after the processes
- running in the pod are sent a termination signal and
- the time when the processes are forcibly halted with
- a kill signal. Set this value longer than the expected
- cleanup time for your process. If this value is nil,
- the pod's terminationGracePeriodSeconds will be used.
- Otherwise, this value overrides the value provided
- by the pod spec. Value must be non-negative integer.
- The value zero indicates stop immediately via the
- kill signal (no opportunity to shut down). This is
- a beta field and requires enabling ProbeTerminationGracePeriod
- feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds
- is used if unset.
- format: int64
- type: integer
- timeoutSeconds:
- description: 'Number of seconds after which the probe
- times out. Defaults to 1 second. Minimum value is
- 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
- format: int32
- type: integer
+ volumeName:
+ description: volumeName is the human-readable name of
+ the StorageOS volume. Volume names are only unique
+ within a namespace.
+ type: string
+ volumeNamespace:
+ description: volumeNamespace specifies the scope of
+ the volume within StorageOS. If no namespace is specified
+ then the Pod's namespace will be used. This allows
+ the Kubernetes name scoping to be mirrored within
+ StorageOS for tighter integration. Set VolumeName
+ to any name to override the default behaviour. Set
+ to "default" if you are not using namespaces within
+ StorageOS. Namespaces that do not pre-exist within
+ StorageOS will be created.
+ type: string
+ type: object
+ vsphereVolume:
+ description: vsphereVolume represents a vSphere volume attached
+ and mounted on kubelets host machine
+ properties:
+ fsType:
+ description: fsType is filesystem type to mount. Must
+ be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ storagePolicyID:
+ description: storagePolicyID is the storage Policy Based
+ Management (SPBM) profile ID associated with the StoragePolicyName.
+ type: string
+ storagePolicyName:
+ description: storagePolicyName is the storage Policy
+ Based Management (SPBM) profile name.
+ type: string
+ volumePath:
+ description: volumePath is the path that identifies
+ vSphere volume vmdk
+ type: string
+ required:
+ - volumePath
type: object
+ required:
+ - name
+ type: object
+ type: array
+ hostNetwork:
+ type: boolean
+ image:
+ type: string
+ imagePullPolicy:
+ description: PullPolicy describes a policy for if/when to pull
+ a container image
+ type: string
+ imagePullSecrets:
+ items:
+ description: LocalObjectReference contains enough information
+ to let you locate the referenced object inside the same namespace.
+ properties:
name:
- description: Name of the container specified as a DNS_LABEL.
- Each container in a pod must have a unique name (DNS_LABEL).
- Cannot be updated.
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind, uid?'
type: string
- ports:
- description: List of ports to expose from the container.
- Exposing a port here gives the system additional information
- about the network connections a container uses, but is
- primarily informational. Not specifying a port here DOES
- NOT prevent that port from being exposed. Any port which
- is listening on the default "0.0.0.0" address inside a
- container will be accessible from the network. Cannot
- be updated.
+ type: object
+ type: array
+ initContainers:
+ items:
+ description: A single application container that you want to
+ run within a pod.
+ properties:
+ args:
+ description: 'Arguments to the entrypoint. The container
+ image''s CMD is used if this is not provided. Variable
+ references $(VAR_NAME) are expanded using the container''s
+ environment. If a variable cannot be resolved, the reference
+ in the input string will be unchanged. Double $$ are reduced
+ to a single $, which allows for escaping the $(VAR_NAME)
+ syntax: i.e. "$$(VAR_NAME)" will produce the string literal
+ "$(VAR_NAME)". Escaped references will never be expanded,
+ regardless of whether the variable exists or not. Cannot
+ be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
items:
- description: ContainerPort represents a network port in
- a single container.
+ type: string
+ type: array
+ command:
+ description: 'Entrypoint array. Not executed within a shell.
+ The container image''s ENTRYPOINT is used if this is not
+ provided. Variable references $(VAR_NAME) are expanded
+ using the container''s environment. If a variable cannot
+ be resolved, the reference in the input string will be
+ unchanged. Double $$ are reduced to a single $, which
+ allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)"
+ will produce the string literal "$(VAR_NAME)". Escaped
+ references will never be expanded, regardless of whether
+ the variable exists or not. Cannot be updated. More info:
+ https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell'
+ items:
+ type: string
+ type: array
+ env:
+ description: List of environment variables to set in the
+ container. Cannot be updated.
+ items:
+ description: EnvVar represents an environment variable
+ present in a Container.
properties:
- containerPort:
- description: Number of port to expose on the pod's
- IP address. This must be a valid port number, 0
- < x < 65536.
- format: int32
- type: integer
- hostIP:
- description: What host IP to bind the external port
- to.
- type: string
- hostPort:
- description: Number of port to expose on the host.
- If specified, this must be a valid port number,
- 0 < x < 65536. If HostNetwork is specified, this
- must match ContainerPort. Most containers do not
- need this.
- format: int32
- type: integer
name:
- description: If specified, this must be an IANA_SVC_NAME
- and unique within the pod. Each named port in a
- pod must have a unique name. Name for the port that
- can be referred to by services.
+ description: Name of the environment variable. Must
+ be a C_IDENTIFIER.
type: string
- protocol:
- default: TCP
- description: Protocol for port. Must be UDP, TCP,
- or SCTP. Defaults to "TCP".
+ value:
+ description: 'Variable references $(VAR_NAME) are
+ expanded using the previously defined environment
+ variables in the container and any service environment
+ variables. If a variable cannot be resolved, the
+ reference in the input string will be unchanged.
+ Double $$ are reduced to a single $, which allows
+ for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)"
+ will produce the string literal "$(VAR_NAME)". Escaped
+ references will never be expanded, regardless of
+ whether the variable exists or not. Defaults to
+ "".'
type: string
- required:
- - containerPort
- type: object
- type: array
- x-kubernetes-list-map-keys:
- - containerPort
- - protocol
- x-kubernetes-list-type: map
- readinessProbe:
- description: 'Periodic probe of container service readiness.
- Container will be removed from service endpoints if the
- probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
- properties:
- exec:
- description: Exec specifies the action to take.
- properties:
- command:
- description: Command is the command line to execute
- inside the container, the working directory for
- the command is root ('/') in the container's
- filesystem. The command is simply exec'd, it is
- not run inside a shell, so traditional shell instructions
- ('|', etc) won't work. To use a shell, you need
- to explicitly call out to that shell. Exit status
- of 0 is treated as live/healthy and non-zero is
- unhealthy.
- items:
- type: string
- type: array
- type: object
- failureThreshold:
- description: Minimum consecutive failures for the probe
- to be considered failed after having succeeded. Defaults
- to 3. Minimum value is 1.
- format: int32
- type: integer
- grpc:
- description: GRPC specifies an action involving a GRPC
- port. This is a beta field and requires enabling GRPCContainerProbe
- feature gate.
- properties:
- port:
- description: Port number of the gRPC service. Number
- must be in the range 1 to 65535.
- format: int32
- type: integer
- service:
- description: "Service is the name of the service
- to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
- \n If this is not specified, the default behavior
- is defined by gRPC."
- type: string
- required:
- - port
- type: object
- httpGet:
- description: HTTPGet specifies the http request to perform.
- properties:
- host:
- description: Host name to connect to, defaults to
- the pod IP. You probably want to set "Host" in
+ valueFrom:
+ description: Source for the environment variable's
+ value. Cannot be used if value is not empty.
+ properties:
+ configMapKeyRef:
+ description: Selects a key of a ConfigMap.
+ properties:
+ key:
+ description: The key to select.
+ type: string
+ name:
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion,
+ kind, uid?'
+ type: string
+ optional:
+ description: Specify whether the ConfigMap
+ or its key must be defined
+ type: boolean
+ required:
+ - key
+ type: object
+ fieldRef:
+ description: 'Selects a field of the pod: supports
+ metadata.name, metadata.namespace, `metadata.labels[''<KEY>'']`,
+ `metadata.annotations[''<KEY>'']`, spec.nodeName,
+ spec.serviceAccountName, status.hostIP, status.podIP,
+ status.podIPs.'
+ properties:
+ apiVersion:
+ description: Version of the schema the FieldPath
+ is written in terms of, defaults to "v1".
+ type: string
+ fieldPath:
+ description: Path of the field to select in
+ the specified API version.
+ type: string
+ required:
+ - fieldPath
+ type: object
+ resourceFieldRef:
+ description: 'Selects a resource of the container:
+ only resources limits and requests (limits.cpu,
+ limits.memory, limits.ephemeral-storage, requests.cpu,
+ requests.memory and requests.ephemeral-storage)
+ are currently supported.'
+ properties:
+ containerName:
+ description: 'Container name: required for
+ volumes, optional for env vars'
+ type: string
+ divisor:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Specifies the output format of
+ the exposed resources, defaults to "1"
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ resource:
+ description: 'Required: resource to select'
+ type: string
+ required:
+ - resource
+ type: object
+ secretKeyRef:
+ description: Selects a key of a secret in the
+ pod's namespace
+ properties:
+ key:
+ description: The key of the secret to select
+ from. Must be a valid secret key.
+ type: string
+ name:
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion,
+ kind, uid?'
+ type: string
+ optional:
+ description: Specify whether the Secret or
+ its key must be defined
+ type: boolean
+ required:
+ - key
+ type: object
+ type: object
+ required:
+ - name
+ type: object
+ type: array
+ envFrom:
+ description: List of sources to populate environment variables
+ in the container. The keys defined within a source must
+ be a C_IDENTIFIER. All invalid keys will be reported as
+ an event when the container is starting. When a key exists
+ in multiple sources, the value associated with the last
+ source will take precedence. Values defined by an Env
+ with a duplicate key will take precedence. Cannot be updated.
+ items:
+ description: EnvFromSource represents the source of a
+ set of ConfigMaps
+ properties:
+ configMapRef:
+ description: The ConfigMap to select from
+ properties:
+ name:
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
+ optional:
+ description: Specify whether the ConfigMap must
+ be defined
+ type: boolean
+ type: object
+ prefix:
+ description: An optional identifier to prepend to
+ each key in the ConfigMap. Must be a C_IDENTIFIER.
+ type: string
+ secretRef:
+ description: The Secret to select from
+ properties:
+ name:
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
+ optional:
+ description: Specify whether the Secret must be
+ defined
+ type: boolean
+ type: object
+ type: object
+ type: array
+ image:
+ description: 'Container image name. More info: https://kubernetes.io/docs/concepts/containers/images
+ This field is optional to allow higher level config management
+ to default or override container images in workload controllers
+ like Deployments and StatefulSets.'
+ type: string
+ imagePullPolicy:
+ description: 'Image pull policy. One of Always, Never, IfNotPresent.
+ Defaults to Always if :latest tag is specified, or IfNotPresent
+ otherwise. Cannot be updated. More info: https://kubernetes.io/docs/concepts/containers/images#updating-images'
+ type: string
+ lifecycle:
+ description: Actions that the management system should take
+ in response to container lifecycle events. Cannot be updated.
+ properties:
+ postStart:
+ description: 'PostStart is called immediately after
+ a container is created. If the handler fails, the
+ container is terminated and restarted according to
+ its restart policy. Other management of the container
+ blocks until the hook completes. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
+ properties:
+ exec:
+ description: Exec specifies the action to take.
+ properties:
+ command:
+ description: Command is the command line to
+ execute inside the container, the working
+ directory for the command is root ('/') in
+ the container's filesystem. The command is
+ simply exec'd, it is not run inside a shell,
+ so traditional shell instructions ('|', etc)
+ won't work. To use a shell, you need to explicitly
+ call out to that shell. Exit status of 0 is
+ treated as live/healthy and non-zero is unhealthy.
+ items:
+ type: string
+ type: array
+ type: object
+ httpGet:
+ description: HTTPGet specifies the http request
+ to perform.
+ properties:
+ host:
+ description: Host name to connect to, defaults
+ to the pod IP. You probably want to set "Host"
+ in httpHeaders instead.
+ type: string
+ httpHeaders:
+ description: Custom headers to set in the request.
+ HTTP allows repeated headers.
+ items:
+ description: HTTPHeader describes a custom
+ header to be used in HTTP probes
+ properties:
+ name:
+ description: The header field name
+ type: string
+ value:
+ description: The header field value
+ type: string
+ required:
+ - name
+ - value
+ type: object
+ type: array
+ path:
+ description: Path to access on the HTTP server.
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Name or number of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ scheme:
+ description: Scheme to use for connecting to
+ the host. Defaults to HTTP.
+ type: string
+ required:
+ - port
+ type: object
+ tcpSocket:
+ description: Deprecated. TCPSocket is NOT supported
+ as a LifecycleHandler and kept for the backward
+ compatibility. There are no validation of this
+ field and lifecycle hooks will fail in runtime
+ when tcp handler is specified.
+ properties:
+ host:
+ description: 'Optional: Host name to connect
+ to, defaults to the pod IP.'
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Number or name of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ required:
+ - port
+ type: object
+ type: object
+ preStop:
+ description: 'PreStop is called immediately before a
+ container is terminated due to an API request or management
+ event such as liveness/startup probe failure, preemption,
+ resource contention, etc. The handler is not called
+ if the container crashes or exits. The Pod''s termination
+ grace period countdown begins before the PreStop hook
+ is executed. Regardless of the outcome of the handler,
+ the container will eventually terminate within the
+ Pod''s termination grace period (unless delayed by
+ finalizers). Other management of the container blocks
+ until the hook completes or until the termination
+ grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks'
+ properties:
+ exec:
+ description: Exec specifies the action to take.
+ properties:
+ command:
+ description: Command is the command line to
+ execute inside the container, the working
+ directory for the command is root ('/') in
+ the container's filesystem. The command is
+ simply exec'd, it is not run inside a shell,
+ so traditional shell instructions ('|', etc)
+ won't work. To use a shell, you need to explicitly
+ call out to that shell. Exit status of 0 is
+ treated as live/healthy and non-zero is unhealthy.
+ items:
+ type: string
+ type: array
+ type: object
+ httpGet:
+ description: HTTPGet specifies the http request
+ to perform.
+ properties:
+ host:
+ description: Host name to connect to, defaults
+ to the pod IP. You probably want to set "Host"
+ in httpHeaders instead.
+ type: string
+ httpHeaders:
+ description: Custom headers to set in the request.
+ HTTP allows repeated headers.
+ items:
+ description: HTTPHeader describes a custom
+ header to be used in HTTP probes
+ properties:
+ name:
+ description: The header field name
+ type: string
+ value:
+ description: The header field value
+ type: string
+ required:
+ - name
+ - value
+ type: object
+ type: array
+ path:
+ description: Path to access on the HTTP server.
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Name or number of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ scheme:
+ description: Scheme to use for connecting to
+ the host. Defaults to HTTP.
+ type: string
+ required:
+ - port
+ type: object
+ tcpSocket:
+ description: Deprecated. TCPSocket is NOT supported
+ as a LifecycleHandler and kept for the backward
+ compatibility. There are no validation of this
+ field and lifecycle hooks will fail in runtime
+ when tcp handler is specified.
+ properties:
+ host:
+ description: 'Optional: Host name to connect
+ to, defaults to the pod IP.'
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Number or name of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ required:
+ - port
+ type: object
+ type: object
+ type: object
+ livenessProbe:
+ description: 'Periodic probe of container liveness. Container
+ will be restarted if the probe fails. Cannot be updated.
+ More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ properties:
+ exec:
+ description: Exec specifies the action to take.
+ properties:
+ command:
+ description: Command is the command line to execute
+ inside the container, the working directory for
+ the command is root ('/') in the container's
+ filesystem. The command is simply exec'd, it is
+ not run inside a shell, so traditional shell instructions
+ ('|', etc) won't work. To use a shell, you need
+ to explicitly call out to that shell. Exit status
+ of 0 is treated as live/healthy and non-zero is
+ unhealthy.
+ items:
+ type: string
+ type: array
+ type: object
+ failureThreshold:
+ description: Minimum consecutive failures for the probe
+ to be considered failed after having succeeded. Defaults
+ to 3. Minimum value is 1.
+ format: int32
+ type: integer
+ grpc:
+ description: GRPC specifies an action involving a GRPC
+ port. This is a beta field and requires enabling GRPCContainerProbe
+ feature gate.
+ properties:
+ port:
+ description: Port number of the gRPC service. Number
+ must be in the range 1 to 65535.
+ format: int32
+ type: integer
+ service:
+ description: "Service is the name of the service
+ to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
+ \n If this is not specified, the default behavior
+ is defined by gRPC."
+ type: string
+ required:
+ - port
+ type: object
+ httpGet:
+ description: HTTPGet specifies the http request to perform.
+ properties:
+ host:
+ description: Host name to connect to, defaults to
+ the pod IP. You probably want to set "Host" in
+ httpHeaders instead.
+ type: string
+ httpHeaders:
+ description: Custom headers to set in the request.
+ HTTP allows repeated headers.
+ items:
+ description: HTTPHeader describes a custom header
+ to be used in HTTP probes
+ properties:
+ name:
+ description: The header field name
+ type: string
+ value:
+ description: The header field value
+ type: string
+ required:
+ - name
+ - value
+ type: object
+ type: array
+ path:
+ description: Path to access on the HTTP server.
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Name or number of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ scheme:
+ description: Scheme to use for connecting to the
+ host. Defaults to HTTP.
+ type: string
+ required:
+ - port
+ type: object
+ initialDelaySeconds:
+ description: 'Number of seconds after the container
+ has started before liveness probes are initiated.
+ More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ format: int32
+ type: integer
+ periodSeconds:
+ description: How often (in seconds) to perform the probe.
+ Default to 10 seconds. Minimum value is 1.
+ format: int32
+ type: integer
+ successThreshold:
+ description: Minimum consecutive successes for the probe
+ to be considered successful after having failed. Defaults
+ to 1. Must be 1 for liveness and startup. Minimum
+ value is 1.
+ format: int32
+ type: integer
+ tcpSocket:
+ description: TCPSocket specifies an action involving
+ a TCP port.
+ properties:
+ host:
+ description: 'Optional: Host name to connect to,
+ defaults to the pod IP.'
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Number or name of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ required:
+ - port
+ type: object
+ terminationGracePeriodSeconds:
+ description: Optional duration in seconds the pod needs
+ to terminate gracefully upon probe failure. The grace
+ period is the duration in seconds after the processes
+ running in the pod are sent a termination signal and
+ the time when the processes are forcibly halted with
+ a kill signal. Set this value longer than the expected
+ cleanup time for your process. If this value is nil,
+ the pod's terminationGracePeriodSeconds will be used.
+ Otherwise, this value overrides the value provided
+ by the pod spec. Value must be non-negative integer.
+ The value zero indicates stop immediately via the
+ kill signal (no opportunity to shut down). This is
+ a beta field and requires enabling ProbeTerminationGracePeriod
+ feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds
+ is used if unset.
+ format: int64
+ type: integer
+ timeoutSeconds:
+ description: 'Number of seconds after which the probe
+ times out. Defaults to 1 second. Minimum value is
+ 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ format: int32
+ type: integer
+ type: object
+ name:
+ description: Name of the container specified as a DNS_LABEL.
+ Each container in a pod must have a unique name (DNS_LABEL).
+ Cannot be updated.
+ type: string
+ ports:
+ description: List of ports to expose from the container.
+ Exposing a port here gives the system additional information
+ about the network connections a container uses, but is
+ primarily informational. Not specifying a port here DOES
+ NOT prevent that port from being exposed. Any port which
+ is listening on the default "0.0.0.0" address inside a
+ container will be accessible from the network. Cannot
+ be updated.
+ items:
+ description: ContainerPort represents a network port in
+ a single container.
+ properties:
+ containerPort:
+ description: Number of port to expose on the pod's
+ IP address. This must be a valid port number, 0
+ < x < 65536.
+ format: int32
+ type: integer
+ hostIP:
+ description: What host IP to bind the external port
+ to.
+ type: string
+ hostPort:
+ description: Number of port to expose on the host.
+ If specified, this must be a valid port number,
+ 0 < x < 65536. If HostNetwork is specified, this
+ must match ContainerPort. Most containers do not
+ need this.
+ format: int32
+ type: integer
+ name:
+ description: If specified, this must be an IANA_SVC_NAME
+ and unique within the pod. Each named port in a
+ pod must have a unique name. Name for the port that
+ can be referred to by services.
+ type: string
+ protocol:
+ default: TCP
+ description: Protocol for port. Must be UDP, TCP,
+ or SCTP. Defaults to "TCP".
+ type: string
+ required:
+ - containerPort
+ type: object
+ type: array
+ x-kubernetes-list-map-keys:
+ - containerPort
+ - protocol
+ x-kubernetes-list-type: map
+ readinessProbe:
+ description: 'Periodic probe of container service readiness.
+ Container will be removed from service endpoints if the
+ probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ properties:
+ exec:
+ description: Exec specifies the action to take.
+ properties:
+ command:
+ description: Command is the command line to execute
+ inside the container, the working directory for
+ the command is root ('/') in the container's
+ filesystem. The command is simply exec'd, it is
+ not run inside a shell, so traditional shell instructions
+ ('|', etc) won't work. To use a shell, you need
+ to explicitly call out to that shell. Exit status
+ of 0 is treated as live/healthy and non-zero is
+ unhealthy.
+ items:
+ type: string
+ type: array
+ type: object
+ failureThreshold:
+ description: Minimum consecutive failures for the probe
+ to be considered failed after having succeeded. Defaults
+ to 3. Minimum value is 1.
+ format: int32
+ type: integer
+ grpc:
+ description: GRPC specifies an action involving a GRPC
+ port. This is a beta field and requires enabling GRPCContainerProbe
+ feature gate.
+ properties:
+ port:
+ description: Port number of the gRPC service. Number
+ must be in the range 1 to 65535.
+ format: int32
+ type: integer
+ service:
+ description: "Service is the name of the service
+ to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
+ \n If this is not specified, the default behavior
+ is defined by gRPC."
+ type: string
+ required:
+ - port
+ type: object
+ httpGet:
+ description: HTTPGet specifies the http request to perform.
+ properties:
+ host:
+ description: Host name to connect to, defaults to
+ the pod IP. You probably want to set "Host" in
httpHeaders instead.
type: string
httpHeaders:
@@ -6849,65 +8442,430 @@ spec:
format: int32
type: integer
type: object
- name:
- description: Name of the container specified as a DNS_LABEL.
- Each container in a pod must have a unique name (DNS_LABEL).
- Cannot be updated.
- type: string
- ports:
- description: List of ports to expose from the container.
- Exposing a port here gives the system additional information
- about the network connections a container uses, but is
- primarily informational. Not specifying a port here DOES
- NOT prevent that port from being exposed. Any port which
- is listening on the default "0.0.0.0" address inside a
- container will be accessible from the network. Cannot
- be updated.
- items:
- description: ContainerPort represents a network port in
- a single container.
- properties:
- containerPort:
- description: Number of port to expose on the pod's
- IP address. This must be a valid port number, 0
- < x < 65536.
- format: int32
- type: integer
- hostIP:
- description: What host IP to bind the external port
- to.
- type: string
- hostPort:
- description: Number of port to expose on the host.
- If specified, this must be a valid port number,
- 0 < x < 65536. If HostNetwork is specified, this
- must match ContainerPort. Most containers do not
- need this.
- format: int32
- type: integer
- name:
- description: If specified, this must be an IANA_SVC_NAME
- and unique within the pod. Each named port in a
- pod must have a unique name. Name for the port that
- can be referred to by services.
- type: string
- protocol:
- default: TCP
- description: Protocol for port. Must be UDP, TCP,
- or SCTP. Defaults to "TCP".
- type: string
- required:
- - containerPort
- type: object
- type: array
- x-kubernetes-list-map-keys:
- - containerPort
- - protocol
- x-kubernetes-list-type: map
- readinessProbe:
- description: 'Periodic probe of container service readiness.
- Container will be removed from service endpoints if the
- probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ name:
+ description: Name of the container specified as a DNS_LABEL.
+ Each container in a pod must have a unique name (DNS_LABEL).
+ Cannot be updated.
+ type: string
+ ports:
+ description: List of ports to expose from the container.
+ Exposing a port here gives the system additional information
+ about the network connections a container uses, but is
+ primarily informational. Not specifying a port here DOES
+ NOT prevent that port from being exposed. Any port which
+ is listening on the default "0.0.0.0" address inside a
+ container will be accessible from the network. Cannot
+ be updated.
+ items:
+ description: ContainerPort represents a network port in
+ a single container.
+ properties:
+ containerPort:
+ description: Number of port to expose on the pod's
+ IP address. This must be a valid port number, 0
+ < x < 65536.
+ format: int32
+ type: integer
+ hostIP:
+ description: What host IP to bind the external port
+ to.
+ type: string
+ hostPort:
+ description: Number of port to expose on the host.
+ If specified, this must be a valid port number,
+ 0 < x < 65536. If HostNetwork is specified, this
+ must match ContainerPort. Most containers do not
+ need this.
+ format: int32
+ type: integer
+ name:
+ description: If specified, this must be an IANA_SVC_NAME
+ and unique within the pod. Each named port in a
+ pod must have a unique name. Name for the port that
+ can be referred to by services.
+ type: string
+ protocol:
+ default: TCP
+ description: Protocol for port. Must be UDP, TCP,
+ or SCTP. Defaults to "TCP".
+ type: string
+ required:
+ - containerPort
+ type: object
+ type: array
+ x-kubernetes-list-map-keys:
+ - containerPort
+ - protocol
+ x-kubernetes-list-type: map
+ readinessProbe:
+ description: 'Periodic probe of container service readiness.
+ Container will be removed from service endpoints if the
+ probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ properties:
+ exec:
+ description: Exec specifies the action to take.
+ properties:
+ command:
+ description: Command is the command line to execute
+ inside the container, the working directory for
+ the command is root ('/') in the container's
+ filesystem. The command is simply exec'd, it is
+ not run inside a shell, so traditional shell instructions
+ ('|', etc) won't work. To use a shell, you need
+ to explicitly call out to that shell. Exit status
+ of 0 is treated as live/healthy and non-zero is
+ unhealthy.
+ items:
+ type: string
+ type: array
+ type: object
+ failureThreshold:
+ description: Minimum consecutive failures for the probe
+ to be considered failed after having succeeded. Defaults
+ to 3. Minimum value is 1.
+ format: int32
+ type: integer
+ grpc:
+ description: GRPC specifies an action involving a GRPC
+ port. This is a beta field and requires enabling GRPCContainerProbe
+ feature gate.
+ properties:
+ port:
+ description: Port number of the gRPC service. Number
+ must be in the range 1 to 65535.
+ format: int32
+ type: integer
+ service:
+ description: "Service is the name of the service
+ to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
+ \n If this is not specified, the default behavior
+ is defined by gRPC."
+ type: string
+ required:
+ - port
+ type: object
+ httpGet:
+ description: HTTPGet specifies the http request to perform.
+ properties:
+ host:
+ description: Host name to connect to, defaults to
+ the pod IP. You probably want to set "Host" in
+ httpHeaders instead.
+ type: string
+ httpHeaders:
+ description: Custom headers to set in the request.
+ HTTP allows repeated headers.
+ items:
+ description: HTTPHeader describes a custom header
+ to be used in HTTP probes
+ properties:
+ name:
+ description: The header field name
+ type: string
+ value:
+ description: The header field value
+ type: string
+ required:
+ - name
+ - value
+ type: object
+ type: array
+ path:
+ description: Path to access on the HTTP server.
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Name or number of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ scheme:
+ description: Scheme to use for connecting to the
+ host. Defaults to HTTP.
+ type: string
+ required:
+ - port
+ type: object
+ initialDelaySeconds:
+ description: 'Number of seconds after the container
+ has started before liveness probes are initiated.
+ More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ format: int32
+ type: integer
+ periodSeconds:
+ description: How often (in seconds) to perform the probe.
+ Default to 10 seconds. Minimum value is 1.
+ format: int32
+ type: integer
+ successThreshold:
+ description: Minimum consecutive successes for the probe
+ to be considered successful after having failed. Defaults
+ to 1. Must be 1 for liveness and startup. Minimum
+ value is 1.
+ format: int32
+ type: integer
+ tcpSocket:
+ description: TCPSocket specifies an action involving
+ a TCP port.
+ properties:
+ host:
+ description: 'Optional: Host name to connect to,
+ defaults to the pod IP.'
+ type: string
+ port:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Number or name of the port to access
+ on the container. Number must be in the range
+ 1 to 65535. Name must be an IANA_SVC_NAME.
+ x-kubernetes-int-or-string: true
+ required:
+ - port
+ type: object
+ terminationGracePeriodSeconds:
+ description: Optional duration in seconds the pod needs
+ to terminate gracefully upon probe failure. The grace
+ period is the duration in seconds after the processes
+ running in the pod are sent a termination signal and
+ the time when the processes are forcibly halted with
+ a kill signal. Set this value longer than the expected
+ cleanup time for your process. If this value is nil,
+ the pod's terminationGracePeriodSeconds will be used.
+ Otherwise, this value overrides the value provided
+ by the pod spec. Value must be non-negative integer.
+ The value zero indicates stop immediately via the
+ kill signal (no opportunity to shut down). This is
+ a beta field and requires enabling ProbeTerminationGracePeriod
+ feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds
+ is used if unset.
+ format: int64
+ type: integer
+ timeoutSeconds:
+ description: 'Number of seconds after which the probe
+ times out. Defaults to 1 second. Minimum value is
+ 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ format: int32
+ type: integer
+ type: object
+ resources:
+ description: 'Compute Resources required by this container.
+ Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ properties:
+ limits:
+ additionalProperties:
+ anyOf:
+ - type: integer
+ - type: string
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ description: 'Limits describes the maximum amount of
+ compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ type: object
+ requests:
+ additionalProperties:
+ anyOf:
+ - type: integer
+ - type: string
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ description: 'Requests describes the minimum amount
+ of compute resources required. If Requests is omitted
+ for a container, it defaults to Limits if that is
+ explicitly specified, otherwise to an implementation-defined
+ value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ type: object
+ type: object
+ securityContext:
+ description: 'SecurityContext defines the security options
+ the container should be run with. If set, the fields of
+ SecurityContext override the equivalent fields of PodSecurityContext.
+ More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/'
+ properties:
+ allowPrivilegeEscalation:
+ description: 'AllowPrivilegeEscalation controls whether
+ a process can gain more privileges than its parent
+ process. This bool directly controls if the no_new_privs
+ flag will be set on the container process. AllowPrivilegeEscalation
+ is true always when the container is: 1) run as Privileged
+ 2) has CAP_SYS_ADMIN Note that this field cannot be
+ set when spec.os.name is windows.'
+ type: boolean
+ capabilities:
+ description: The capabilities to add/drop when running
+ containers. Defaults to the default set of capabilities
+ granted by the container runtime. Note that this field
+ cannot be set when spec.os.name is windows.
+ properties:
+ add:
+ description: Added capabilities
+ items:
+ description: Capability represent POSIX capabilities
+ type
+ type: string
+ type: array
+ drop:
+ description: Removed capabilities
+ items:
+ description: Capability represent POSIX capabilities
+ type
+ type: string
+ type: array
+ type: object
+ privileged:
+ description: Run container in privileged mode. Processes
+ in privileged containers are essentially equivalent
+ to root on the host. Defaults to false. Note that
+ this field cannot be set when spec.os.name is windows.
+ type: boolean
+ procMount:
+ description: procMount denotes the type of proc mount
+ to use for the containers. The default is DefaultProcMount
+ which uses the container runtime defaults for readonly
+ paths and masked paths. This requires the ProcMountType
+ feature flag to be enabled. Note that this field cannot
+ be set when spec.os.name is windows.
+ type: string
+ readOnlyRootFilesystem:
+ description: Whether this container has a read-only
+ root filesystem. Default is false. Note that this
+ field cannot be set when spec.os.name is windows.
+ type: boolean
+ runAsGroup:
+ description: The GID to run the entrypoint of the container
+ process. Uses runtime default if unset. May also be
+ set in PodSecurityContext. If set in both SecurityContext
+ and PodSecurityContext, the value specified in SecurityContext
+ takes precedence. Note that this field cannot be set
+ when spec.os.name is windows.
+ format: int64
+ type: integer
+ runAsNonRoot:
+ description: Indicates that the container must run as
+ a non-root user. If true, the Kubelet will validate
+ the image at runtime to ensure that it does not run
+ as UID 0 (root) and fail to start the container if
+ it does. If unset or false, no such validation will
+ be performed. May also be set in PodSecurityContext. If
+ set in both SecurityContext and PodSecurityContext,
+ the value specified in SecurityContext takes precedence.
+ type: boolean
+ runAsUser:
+ description: The UID to run the entrypoint of the container
+ process. Defaults to user specified in image metadata
+ if unspecified. May also be set in PodSecurityContext. If
+ set in both SecurityContext and PodSecurityContext,
+ the value specified in SecurityContext takes precedence.
+ Note that this field cannot be set when spec.os.name
+ is windows.
+ format: int64
+ type: integer
+ seLinuxOptions:
+ description: The SELinux context to be applied to the
+ container. If unspecified, the container runtime will
+ allocate a random SELinux context for each container. May
+ also be set in PodSecurityContext. If set in both
+ SecurityContext and PodSecurityContext, the value
+ specified in SecurityContext takes precedence. Note
+ that this field cannot be set when spec.os.name is
+ windows.
+ properties:
+ level:
+ description: Level is SELinux level label that applies
+ to the container.
+ type: string
+ role:
+ description: Role is a SELinux role label that applies
+ to the container.
+ type: string
+ type:
+ description: Type is a SELinux type label that applies
+ to the container.
+ type: string
+ user:
+ description: User is a SELinux user label that applies
+ to the container.
+ type: string
+ type: object
+ seccompProfile:
+ description: The seccomp options to use by this container.
+ If seccomp options are provided at both the pod &
+ container level, the container options override the
+ pod options. Note that this field cannot be set when
+ spec.os.name is windows.
+ properties:
+ localhostProfile:
+ description: localhostProfile indicates a profile
+ defined in a file on the node should be used.
+ The profile must be preconfigured on the node
+ to work. Must be a descending path, relative to
+ the kubelet's configured seccomp profile location.
+ Must only be set if type is "Localhost".
+ type: string
+ type:
+ description: "type indicates which kind of seccomp
+ profile will be applied. Valid options are: \n
+ Localhost - a profile defined in a file on the
+ node should be used. RuntimeDefault - the container
+ runtime default profile should be used. Unconfined
+ - no profile should be applied."
+ type: string
+ required:
+ - type
+ type: object
+ windowsOptions:
+ description: The Windows specific settings applied to
+ all containers. If unspecified, the options from the
+ PodSecurityContext will be used. If set in both SecurityContext
+ and PodSecurityContext, the value specified in SecurityContext
+ takes precedence. Note that this field cannot be set
+ when spec.os.name is linux.
+ properties:
+ gmsaCredentialSpec:
+ description: GMSACredentialSpec is where the GMSA
+ admission webhook (https://github.com/kubernetes-sigs/windows-gmsa)
+ inlines the contents of the GMSA credential spec
+ named by the GMSACredentialSpecName field.
+ type: string
+ gmsaCredentialSpecName:
+ description: GMSACredentialSpecName is the name
+ of the GMSA credential spec to use.
+ type: string
+ hostProcess:
+ description: HostProcess determines if a container
+ should be run as a 'Host Process' container. This
+ field is alpha-level and will only be honored
+ by components that enable the WindowsHostProcessContainers
+ feature flag. Setting this field without the feature
+ flag will result in errors when validating the
+ Pod. All of a Pod's containers must have the same
+ effective HostProcess value (it is not allowed
+ to have a mix of HostProcess containers and non-HostProcess
+ containers). In addition, if HostProcess is true
+ then HostNetwork must also be set to true.
+ type: boolean
+ runAsUserName:
+ description: The UserName in Windows to run the
+ entrypoint of the container process. Defaults
+ to the user specified in image metadata if unspecified.
+ May also be set in PodSecurityContext. If set
+ in both SecurityContext and PodSecurityContext,
+ the value specified in SecurityContext takes precedence.
+ type: string
+ type: object
+ type: object
+ startupProbe:
+ description: 'StartupProbe indicates that the Pod has successfully
+ initialized. If specified, no other probes are executed
+ until this completes successfully. If this probe fails,
+ the Pod will be restarted, just as if the livenessProbe
+ failed. This can be used to provide different probe parameters
+ at the beginning of a Pod''s lifecycle, when it might
+ take a long time to load data or warm a cache, than during
+ steady-state operation. This cannot be updated. More info:
+ https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
properties:
exec:
description: Exec specifies the action to take.
@@ -7057,482 +9015,1710 @@ spec:
format: int32
type: integer
type: object
- resources:
- description: 'Compute Resources required by this container.
- Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ stdin:
+ description: Whether this container should allocate a buffer
+ for stdin in the container runtime. If this is not set,
+ reads from stdin in the container will always result in
+ EOF. Default is false.
+ type: boolean
+ stdinOnce:
+ description: Whether the container runtime should close
+ the stdin channel after it has been opened by a single
+ attach. When stdin is true the stdin stream will remain
+ open across multiple attach sessions. If stdinOnce is
+ set to true, stdin is opened on container start, is empty
+ until the first client attaches to stdin, and then remains
+ open and accepts data until the client disconnects, at
+ which time stdin is closed and remains closed until the
+ container is restarted. If this flag is false, a container
+ processes that reads from stdin will never receive an
+ EOF. Default is false
+ type: boolean
+ terminationMessagePath:
+ description: 'Optional: Path at which the file to which
+ the container''s termination message will be written is
+ mounted into the container''s filesystem. Message written
+ is intended to be brief final status, such as an assertion
+ failure message. Will be truncated by the node if greater
+ than 4096 bytes. The total message length across all containers
+ will be limited to 12kb. Defaults to /dev/termination-log.
+ Cannot be updated.'
+ type: string
+ terminationMessagePolicy:
+ description: Indicate how the termination message should
+ be populated. File will use the contents of terminationMessagePath
+ to populate the container status message on both success
+ and failure. FallbackToLogsOnError will use the last chunk
+ of container log output if the termination message file
+ is empty and the container exited with an error. The log
+ output is limited to 2048 bytes or 80 lines, whichever
+ is smaller. Defaults to File. Cannot be updated.
+ type: string
+ tty:
+ description: Whether this container should allocate a TTY
+ for itself, also requires 'stdin' to be true. Default
+ is false.
+ type: boolean
+ volumeDevices:
+ description: volumeDevices is the list of block devices
+ to be used by the container.
+ items:
+ description: volumeDevice describes a mapping of a raw
+ block device within a container.
+ properties:
+ devicePath:
+ description: devicePath is the path inside of the
+ container that the device will be mapped to.
+ type: string
+ name:
+ description: name must match the name of a persistentVolumeClaim
+ in the pod
+ type: string
+ required:
+ - devicePath
+ - name
+ type: object
+ type: array
+ volumeMounts:
+ description: Pod volumes to mount into the container's filesystem.
+ Cannot be updated.
+ items:
+ description: VolumeMount describes a mounting of a Volume
+ within a container.
+ properties:
+ mountPath:
+ description: Path within the container at which the
+ volume should be mounted. Must not contain ':'.
+ type: string
+ mountPropagation:
+ description: mountPropagation determines how mounts
+ are propagated from the host to container and the
+ other way around. When not set, MountPropagationNone
+ is used. This field is beta in 1.10.
+ type: string
+ name:
+ description: This must match the Name of a Volume.
+ type: string
+ readOnly:
+ description: Mounted read-only if true, read-write
+ otherwise (false or unspecified). Defaults to false.
+ type: boolean
+ subPath:
+ description: Path within the volume from which the
+ container's volume should be mounted. Defaults to
+ "" (volume's root).
+ type: string
+ subPathExpr:
+ description: Expanded path within the volume from
+ which the container's volume should be mounted.
+ Behaves similarly to SubPath but environment variable
+ references $(VAR_NAME) are expanded using the container's
+ environment. Defaults to "" (volume's root). SubPathExpr
+ and SubPath are mutually exclusive.
+ type: string
+ required:
+ - mountPath
+ - name
+ type: object
+ type: array
+ workingDir:
+ description: Container's working directory. If not specified,
+ the container runtime's default will be used, which might
+ be configured in the container image. Cannot be updated.
+ type: string
+ required:
+ - name
+ type: object
+ type: array
+ extraVolumeMounts:
+ items:
+ description: VolumeMount describes a mounting of a Volume within
+ a container.
+ properties:
+ mountPath:
+ description: Path within the container at which the volume
+ should be mounted. Must not contain ':'.
+ type: string
+ mountPropagation:
+ description: mountPropagation determines how mounts are
+ propagated from the host to container and the other way
+ around. When not set, MountPropagationNone is used. This
+ field is beta in 1.10.
+ type: string
+ name:
+ description: This must match the Name of a Volume.
+ type: string
+ readOnly:
+ description: Mounted read-only if true, read-write otherwise
+ (false or unspecified). Defaults to false.
+ type: boolean
+ subPath:
+ description: Path within the volume from which the container's
+ volume should be mounted. Defaults to "" (volume's root).
+ type: string
+ subPathExpr:
+ description: Expanded path within the volume from which
+ the container's volume should be mounted. Behaves similarly
+ to SubPath but environment variable references $(VAR_NAME)
+ are expanded using the container's environment. Defaults
+ to "" (volume's root). SubPathExpr and SubPath are mutually
+ exclusive.
+ type: string
+ required:
+ - mountPath
+ - name
+ type: object
+ type: array
+ extraVolumes:
+ items:
+ description: Volume represents a named volume in a pod that
+ may be accessed by any container in the pod.
+ properties:
+ awsElasticBlockStore:
+ description: 'awsElasticBlockStore represents an AWS Disk
+ resource that is attached to a kubelet''s host machine
+ and then exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
properties:
- limits:
- additionalProperties:
- anyOf:
- - type: integer
- - type: string
- pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
- x-kubernetes-int-or-string: true
- description: 'Limits describes the maximum amount of
- compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
- type: object
- requests:
- additionalProperties:
- anyOf:
- - type: integer
- - type: string
- pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
- x-kubernetes-int-or-string: true
- description: 'Requests describes the minimum amount
- of compute resources required. If Requests is omitted
- for a container, it defaults to Limits if that is
- explicitly specified, otherwise to an implementation-defined
- value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ fsType:
+ description: 'fsType is the filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ partition:
+ description: 'partition is the partition in the volume
+ that you want to mount. If omitted, the default is
+ to mount by volume name. Examples: For volume /dev/sda1,
+ you specify the partition as "1". Similarly, the volume
+ partition for /dev/sda is "0" (or you can leave the
+ property empty).'
+ format: int32
+ type: integer
+ readOnly:
+ description: 'readOnly value true will force the readOnly
+ setting in VolumeMounts. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
+ type: boolean
+ volumeID:
+ description: 'volumeID is unique ID of the persistent
+ disk resource in AWS (Amazon EBS volume). More info:
+ https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore'
+ type: string
+ required:
+ - volumeID
+ type: object
+ azureDisk:
+ description: azureDisk represents an Azure Data Disk mount
+ on the host and bind mount to the pod.
+ properties:
+ cachingMode:
+ description: 'cachingMode is the Host Caching mode:
+ None, Read Only, Read Write.'
+ type: string
+ diskName:
+ description: diskName is the Name of the data disk in
+ the blob storage
+ type: string
+ diskURI:
+ description: diskURI is the URI of data disk in the
+ blob storage
+ type: string
+ fsType:
+ description: fsType is Filesystem type to mount. Must
+ be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ kind:
+ description: 'kind expected values are Shared: multiple
+ blob disks per storage account Dedicated: single
+ blob disk per storage account Managed: azure managed
+ data disk (only in managed availability set). defaults
+ to shared'
+ type: string
+ readOnly:
+ description: readOnly Defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ required:
+ - diskName
+ - diskURI
+ type: object
+ azureFile:
+ description: azureFile represents an Azure File Service
+ mount on the host and bind mount to the pod.
+ properties:
+ readOnly:
+ description: readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ secretName:
+ description: secretName is the name of secret that
+ contains Azure Storage Account Name and Key
+ type: string
+ shareName:
+ description: shareName is the azure share Name
+ type: string
+ required:
+ - secretName
+ - shareName
+ type: object
+ cephfs:
+ description: cephFS represents a Ceph FS mount on the host
+ that shares a pod's lifetime
+ properties:
+ monitors:
+ description: 'monitors is Required: Monitors is a collection
+ of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ items:
+ type: string
+ type: array
+ path:
+ description: 'path is Optional: Used as the mounted
+ root, rather than the full Ceph tree, default is /'
+ type: string
+ readOnly:
+ description: 'readOnly is Optional: Defaults to false
+ (read/write). ReadOnly here will force the ReadOnly
+ setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ type: boolean
+ secretFile:
+ description: 'secretFile is Optional: SecretFile is
+ the path to key ring for User, default is /etc/ceph/user.secret
+ More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ type: string
+ secretRef:
+ description: 'secretRef is Optional: SecretRef is reference
+ to the authentication secret for User, default is
+ empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
type: object
+ user:
+ description: 'user is optional: User is the rados user
+ name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it'
+ type: string
+ required:
+ - monitors
type: object
- securityContext:
- description: 'SecurityContext defines the security options
- the container should be run with. If set, the fields of
- SecurityContext override the equivalent fields of PodSecurityContext.
- More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/'
+ cinder:
+ description: 'cinder represents a cinder volume attached
+ and mounted on kubelets host machine. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
properties:
- allowPrivilegeEscalation:
- description: 'AllowPrivilegeEscalation controls whether
- a process can gain more privileges than its parent
- process. This bool directly controls if the no_new_privs
- flag will be set on the container process. AllowPrivilegeEscalation
- is true always when the container is: 1) run as Privileged
- 2) has CAP_SYS_ADMIN Note that this field cannot be
- set when spec.os.name is windows.'
+ fsType:
+ description: 'fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Examples: "ext4", "xfs", "ntfs". Implicitly
+ inferred to be "ext4" if unspecified. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
+ type: string
+ readOnly:
+ description: 'readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
type: boolean
- capabilities:
- description: The capabilities to add/drop when running
- containers. Defaults to the default set of capabilities
- granted by the container runtime. Note that this field
- cannot be set when spec.os.name is windows.
+ secretRef:
+ description: 'secretRef is optional: points to a secret
+ object containing parameters used to connect to OpenStack.'
properties:
- add:
- description: Added capabilities
- items:
- description: Capability represent POSIX capabilities
- type
- type: string
- type: array
- drop:
- description: Removed capabilities
- items:
- description: Capability represent POSIX capabilities
- type
- type: string
- type: array
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
+ type: string
type: object
- privileged:
- description: Run container in privileged mode. Processes
- in privileged containers are essentially equivalent
- to root on the host. Defaults to false. Note that
- this field cannot be set when spec.os.name is windows.
- type: boolean
- procMount:
- description: procMount denotes the type of proc mount
- to use for the containers. The default is DefaultProcMount
- which uses the container runtime defaults for readonly
- paths and masked paths. This requires the ProcMountType
- feature flag to be enabled. Note that this field cannot
- be set when spec.os.name is windows.
+ volumeID:
+ description: 'volumeID used to identify the volume in
+ cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md'
type: string
- readOnlyRootFilesystem:
- description: Whether this container has a read-only
- root filesystem. Default is false. Note that this
- field cannot be set when spec.os.name is windows.
- type: boolean
- runAsGroup:
- description: The GID to run the entrypoint of the container
- process. Uses runtime default if unset. May also be
- set in PodSecurityContext. If set in both SecurityContext
- and PodSecurityContext, the value specified in SecurityContext
- takes precedence. Note that this field cannot be set
- when spec.os.name is windows.
- format: int64
+ required:
+ - volumeID
+ type: object
+ configMap:
+ description: configMap represents a configMap that should
+ populate this volume
+ properties:
+ defaultMode:
+ description: 'defaultMode is optional: mode bits used
+ to set permissions on created files by default. Must
+ be an octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal values for mode
+ bits. Defaults to 0644. Directories within the path
+ are not affected by this setting. This might be in
+ conflict with other options that affect the file mode,
+ like fsGroup, and the result can be other mode bits
+ set.'
+ format: int32
type: integer
- runAsNonRoot:
- description: Indicates that the container must run as
- a non-root user. If true, the Kubelet will validate
- the image at runtime to ensure that it does not run
- as UID 0 (root) and fail to start the container if
- it does. If unset or false, no such validation will
- be performed. May also be set in PodSecurityContext. If
- set in both SecurityContext and PodSecurityContext,
- the value specified in SecurityContext takes precedence.
+ items:
+ description: items if unspecified, each key-value pair
+ in the Data field of the referenced ConfigMap will
+ be projected into the volume as a file whose name
+ is the key and content is the value. If specified,
+ the listed keys will be projected into the specified
+ paths, and unlisted keys will not be present. If a
+ key is specified which is not present in the ConfigMap,
+ the volume setup will error unless it is marked optional.
+ Paths must be relative and may not contain the '..'
+ path or start with '..'.
+ items:
+ description: Maps a string key to a path within a
+ volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode bits used
+ to set permissions on this file. Must be an
+ octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires decimal values
+ for mode bits. If not specified, the volume
+ defaultMode will be used. This might be in conflict
+ with other options that affect the file mode,
+ like fsGroup, and the result can be other mode
+ bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path of the
+ file to map the key to. May not be an absolute
+ path. May not contain the path element '..'.
+ May not start with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind, uid?'
+ type: string
+ optional:
+ description: optional specify whether the ConfigMap
+ or its keys must be defined
type: boolean
- runAsUser:
- description: The UID to run the entrypoint of the container
- process. Defaults to user specified in image metadata
- if unspecified. May also be set in PodSecurityContext. If
- set in both SecurityContext and PodSecurityContext,
- the value specified in SecurityContext takes precedence.
- Note that this field cannot be set when spec.os.name
- is windows.
- format: int64
- type: integer
- seLinuxOptions:
- description: The SELinux context to be applied to the
- container. If unspecified, the container runtime will
- allocate a random SELinux context for each container. May
- also be set in PodSecurityContext. If set in both
- SecurityContext and PodSecurityContext, the value
- specified in SecurityContext takes precedence. Note
- that this field cannot be set when spec.os.name is
- windows.
+ type: object
+ csi:
+ description: csi (Container Storage Interface) represents
+ ephemeral storage that is handled by certain external
+ CSI drivers (Beta feature).
+ properties:
+ driver:
+ description: driver is the name of the CSI driver that
+ handles this volume. Consult with your admin for the
+ correct name as registered in the cluster.
+ type: string
+ fsType:
+ description: fsType to mount. Ex. "ext4", "xfs", "ntfs".
+ If not provided, the empty value is passed to the
+ associated CSI driver which will determine the default
+ filesystem to apply.
+ type: string
+ nodePublishSecretRef:
+ description: nodePublishSecretRef is a reference to
+ the secret object containing sensitive information
+ to pass to the CSI driver to complete the CSI NodePublishVolume
+ and NodeUnpublishVolume calls. This field is optional,
+ and may be empty if no secret is required. If the
+ secret object contains more than one secret, all secret
+ references are passed.
properties:
- level:
- description: Level is SELinux level label that applies
- to the container.
- type: string
- role:
- description: Role is a SELinux role label that applies
- to the container.
- type: string
- type:
- description: Type is a SELinux type label that applies
- to the container.
- type: string
- user:
- description: User is a SELinux user label that applies
- to the container.
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
type: object
- seccompProfile:
- description: The seccomp options to use by this container.
- If seccomp options are provided at both the pod &
- container level, the container options override the
- pod options. Note that this field cannot be set when
- spec.os.name is windows.
+ readOnly:
+ description: readOnly specifies a read-only configuration
+ for the volume. Defaults to false (read/write).
+ type: boolean
+ volumeAttributes:
+ additionalProperties:
+ type: string
+ description: volumeAttributes stores driver-specific
+ properties that are passed to the CSI driver. Consult
+ your driver's documentation for supported values.
+ type: object
+ required:
+ - driver
+ type: object
+ downwardAPI:
+ description: downwardAPI represents downward API about the
+ pod that should populate this volume
+ properties:
+ defaultMode:
+ description: 'Optional: mode bits to use on created
+ files by default. Must be a Optional: mode bits used
+ to set permissions on created files by default. Must
+ be an octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal values for mode
+ bits. Defaults to 0644. Directories within the path
+ are not affected by this setting. This might be in
+ conflict with other options that affect the file mode,
+ like fsGroup, and the result can be other mode bits
+ set.'
+ format: int32
+ type: integer
+ items:
+ description: Items is a list of downward API volume
+ file
+ items:
+ description: DownwardAPIVolumeFile represents information
+ to create the file containing the pod field
+ properties:
+ fieldRef:
+ description: 'Required: Selects a field of the
+ pod: only annotations, labels, name and namespace
+ are supported.'
+ properties:
+ apiVersion:
+ description: Version of the schema the FieldPath
+ is written in terms of, defaults to "v1".
+ type: string
+ fieldPath:
+ description: Path of the field to select in
+ the specified API version.
+ type: string
+ required:
+ - fieldPath
+ type: object
+ mode:
+ description: 'Optional: mode bits used to set
+ permissions on this file, must be an octal value
+ between 0000 and 0777 or a decimal value between
+ 0 and 511. YAML accepts both octal and decimal
+ values, JSON requires decimal values for mode
+ bits. If not specified, the volume defaultMode
+ will be used. This might be in conflict with
+ other options that affect the file mode, like
+ fsGroup, and the result can be other mode bits
+ set.'
+ format: int32
+ type: integer
+ path:
+ description: 'Required: Path is the relative
+ path name of the file to be created. Must not
+ be absolute or contain the ''..'' path. Must
+ be utf-8 encoded. The first item of the relative
+ path must not start with ''..'''
+ type: string
+ resourceFieldRef:
+ description: 'Selects a resource of the container:
+ only resources limits and requests (limits.cpu,
+ limits.memory, requests.cpu and requests.memory)
+ are currently supported.'
+ properties:
+ containerName:
+ description: 'Container name: required for
+ volumes, optional for env vars'
+ type: string
+ divisor:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Specifies the output format of
+ the exposed resources, defaults to "1"
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ resource:
+ description: 'Required: resource to select'
+ type: string
+ required:
+ - resource
+ type: object
+ required:
+ - path
+ type: object
+ type: array
+ type: object
+ emptyDir:
+ description: 'emptyDir represents a temporary directory
+ that shares a pod''s lifetime. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir'
+ properties:
+ medium:
+ description: 'medium represents what type of storage
+ medium should back this directory. The default is
+ "" which means to use the node''s default medium.
+ Must be an empty string (default) or Memory. More
+ info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir'
+ type: string
+ sizeLimit:
+ anyOf:
+ - type: integer
+ - type: string
+ description: 'sizeLimit is the total amount of local
+ storage required for this EmptyDir volume. The size
+ limit is also applicable for memory medium. The maximum
+ usage on memory medium EmptyDir would be the minimum
+ value between the SizeLimit specified here and the
+ sum of memory limits of all containers in a pod. The
+ default is nil which means that the limit is undefined.
+ More info: http://kubernetes.io/docs/user-guide/volumes#emptydir'
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ type: object
+ ephemeral:
+ description: "ephemeral represents a volume that is handled
+ by a cluster storage driver. The volume's lifecycle is
+ tied to the pod that defines it - it will be created before
+ the pod starts, and deleted when the pod is removed. \n
+ Use this if: a) the volume is only needed while the pod
+ runs, b) features of normal volumes like restoring from
+ snapshot or capacity tracking are needed, c) the storage
+ driver is specified through a storage class, and d) the
+ storage driver supports dynamic volume provisioning through
+ \ a PersistentVolumeClaim (see EphemeralVolumeSource
+ for more information on the connection between this
+ volume type and PersistentVolumeClaim). \n Use PersistentVolumeClaim
+ or one of the vendor-specific APIs for volumes that persist
+ for longer than the lifecycle of an individual pod. \n
+ Use CSI for light-weight local ephemeral volumes if the
+ CSI driver is meant to be used that way - see the documentation
+ of the driver for more information. \n A pod can use both
+ types of ephemeral volumes and persistent volumes at the
+ same time."
+ properties:
+ volumeClaimTemplate:
+ description: "Will be used to create a stand-alone PVC
+ to provision the volume. The pod in which this EphemeralVolumeSource
+ is embedded will be the owner of the PVC, i.e. the
+ PVC will be deleted together with the pod. The name
+ of the PVC will be `<pod name>-<volume name>` where
+ `<volume name>` is the name from the `PodSpec.Volumes`
+ array entry. Pod validation will reject the pod if
+ the concatenated name is not valid for a PVC (for
+ example, too long). \n An existing PVC with that name
+ that is not owned by the pod will *not* be used for
+ the pod to avoid using an unrelated volume by mistake.
+ Starting the pod is then blocked until the unrelated
+ PVC is removed. If such a pre-created PVC is meant
+ to be used by the pod, the PVC has to updated with
+ an owner reference to the pod once the pod exists.
+ Normally this should not be necessary, but it may
+ be useful when manually reconstructing a broken cluster.
+ \n This field is read-only and no changes will be
+ made by Kubernetes to the PVC after it has been created.
+ \n Required, must not be nil."
properties:
- localhostProfile:
- description: localhostProfile indicates a profile
- defined in a file on the node should be used.
- The profile must be preconfigured on the node
- to work. Must be a descending path, relative to
- the kubelet's configured seccomp profile location.
- Must only be set if type is "Localhost".
- type: string
- type:
- description: "type indicates which kind of seccomp
- profile will be applied. Valid options are: \n
- Localhost - a profile defined in a file on the
- node should be used. RuntimeDefault - the container
- runtime default profile should be used. Unconfined
- - no profile should be applied."
- type: string
+ metadata:
+ description: May contain labels and annotations
+ that will be copied into the PVC when creating
+ it. No other fields are allowed and will be rejected
+ during validation.
+ type: object
+ spec:
+ description: The specification for the PersistentVolumeClaim.
+ The entire content is copied unchanged into the
+ PVC that gets created from this template. The
+ same fields as in a PersistentVolumeClaim are
+ also valid here.
+ properties:
+ accessModes:
+ description: 'accessModes contains the desired
+ access modes the volume should have. More
+ info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1'
+ items:
+ type: string
+ type: array
+ dataSource:
+ description: 'dataSource field can be used to
+ specify either: * An existing VolumeSnapshot
+ object (snapshot.storage.k8s.io/VolumeSnapshot)
+ * An existing PVC (PersistentVolumeClaim)
+ If the provisioner or an external controller
+ can support the specified data source, it
+ will create a new volume based on the contents
+ of the specified data source. If the AnyVolumeDataSource
+ feature gate is enabled, this field will always
+ have the same contents as the DataSourceRef
+ field.'
+ properties:
+ apiGroup:
+ description: APIGroup is the group for the
+ resource being referenced. If APIGroup
+ is not specified, the specified Kind must
+ be in the core API group. For any other
+ third-party types, APIGroup is required.
+ type: string
+ kind:
+ description: Kind is the type of resource
+ being referenced
+ type: string
+ name:
+ description: Name is the name of resource
+ being referenced
+ type: string
+ required:
+ - kind
+ - name
+ type: object
+ dataSourceRef:
+ description: 'dataSourceRef specifies the object
+ from which to populate the volume with data,
+ if a non-empty volume is desired. This may
+ be any local object from a non-empty API group
+ (non core object) or a PersistentVolumeClaim
+ object. When this field is specified, volume
+ binding will only succeed if the type of the
+ specified object matches some installed volume
+ populator or dynamic provisioner. This field
+ will replace the functionality of the DataSource
+ field and as such if both fields are non-empty,
+ they must have the same value. For backwards
+ compatibility, both fields (DataSource and
+ DataSourceRef) will be set to the same value
+ automatically if one of them is empty and
+ the other is non-empty. There are two important
+ differences between DataSource and DataSourceRef:
+ * While DataSource only allows two specific
+ types of objects, DataSourceRef allows any
+ non-core object, as well as PersistentVolumeClaim
+ objects. * While DataSource ignores disallowed
+ values (dropping them), DataSourceRef preserves
+ all values, and generates an error if a disallowed
+ value is specified. (Beta) Using this field
+ requires the AnyVolumeDataSource feature gate
+ to be enabled.'
+ properties:
+ apiGroup:
+ description: APIGroup is the group for the
+ resource being referenced. If APIGroup
+ is not specified, the specified Kind must
+ be in the core API group. For any other
+ third-party types, APIGroup is required.
+ type: string
+ kind:
+ description: Kind is the type of resource
+ being referenced
+ type: string
+ name:
+ description: Name is the name of resource
+ being referenced
+ type: string
+ required:
+ - kind
+ - name
+ type: object
+ resources:
+ description: 'resources represents the minimum
+ resources the volume should have. If RecoverVolumeExpansionFailure
+ feature is enabled users are allowed to specify
+ resource requirements that are lower than
+ previous value but must still be higher than
+ capacity recorded in the status field of the
+ claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources'
+ properties:
+ limits:
+ additionalProperties:
+ anyOf:
+ - type: integer
+ - type: string
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ description: 'Limits describes the maximum
+ amount of compute resources allowed. More
+ info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ type: object
+ requests:
+ additionalProperties:
+ anyOf:
+ - type: integer
+ - type: string
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ description: 'Requests describes the minimum
+ amount of compute resources required.
+ If Requests is omitted for a container,
+ it defaults to Limits if that is explicitly
+ specified, otherwise to an implementation-defined
+ value. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/'
+ type: object
+ type: object
+ selector:
+ description: selector is a label query over
+ volumes to consider for binding.
+ properties:
+ matchExpressions:
+ description: matchExpressions is a list
+ of label selector requirements. The requirements
+ are ANDed.
+ items:
+ description: A label selector requirement
+ is a selector that contains values,
+ a key, and an operator that relates
+ the key and values.
+ properties:
+ key:
+ description: key is the label key
+ that the selector applies to.
+ type: string
+ operator:
+ description: operator represents a
+ key's relationship to a set of values.
+ Valid operators are In, NotIn, Exists
+ and DoesNotExist.
+ type: string
+ values:
+ description: values is an array of
+ string values. If the operator is
+ In or NotIn, the values array must
+ be non-empty. If the operator is
+ Exists or DoesNotExist, the values
+ array must be empty. This array
+ is replaced during a strategic merge
+ patch.
+ items:
+ type: string
+ type: array
+ required:
+ - key
+ - operator
+ type: object
+ type: array
+ matchLabels:
+ additionalProperties:
+ type: string
+ description: matchLabels is a map of {key,value}
+ pairs. A single {key,value} in the matchLabels
+ map is equivalent to an element of matchExpressions,
+ whose key field is "key", the operator
+ is "In", and the values array contains
+ only "value". The requirements are ANDed.
+ type: object
+ type: object
+ storageClassName:
+ description: 'storageClassName is the name of
+ the StorageClass required by the claim. More
+ info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1'
+ type: string
+ volumeMode:
+ description: volumeMode defines what type of
+ volume is required by the claim. Value of
+ Filesystem is implied when not included in
+ claim spec.
+ type: string
+ volumeName:
+ description: volumeName is the binding reference
+ to the PersistentVolume backing this claim.
+ type: string
+ type: object
required:
- - type
+ - spec
type: object
- windowsOptions:
- description: The Windows specific settings applied to
- all containers. If unspecified, the options from the
- PodSecurityContext will be used. If set in both SecurityContext
- and PodSecurityContext, the value specified in SecurityContext
- takes precedence. Note that this field cannot be set
- when spec.os.name is linux.
+ type: object
+ fc:
+ description: fc represents a Fibre Channel resource that
+ is attached to a kubelet's host machine and then exposed
+ to the pod.
+ properties:
+ fsType:
+ description: 'fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified. TODO: how do we prevent
+ errors in the filesystem from compromising the machine'
+ type: string
+ lun:
+ description: 'lun is Optional: FC target lun number'
+ format: int32
+ type: integer
+ readOnly:
+ description: 'readOnly is Optional: Defaults to false
+ (read/write). ReadOnly here will force the ReadOnly
+ setting in VolumeMounts.'
+ type: boolean
+ targetWWNs:
+ description: 'targetWWNs is Optional: FC target worldwide
+ names (WWNs)'
+ items:
+ type: string
+ type: array
+ wwids:
+ description: 'wwids Optional: FC volume world wide identifiers
+ (wwids) Either wwids or combination of targetWWNs
+ and lun must be set, but not both simultaneously.'
+ items:
+ type: string
+ type: array
+ type: object
+ flexVolume:
+ description: flexVolume represents a generic volume resource
+ that is provisioned/attached using an exec based plugin.
+ properties:
+ driver:
+ description: driver is the name of the driver to use
+ for this volume.
+ type: string
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". The default filesystem
+ depends on FlexVolume script.
+ type: string
+ options:
+ additionalProperties:
+ type: string
+ description: 'options is Optional: this field holds
+ extra command options if any.'
+ type: object
+ readOnly:
+ description: 'readOnly is Optional: defaults to false
+ (read/write). ReadOnly here will force the ReadOnly
+ setting in VolumeMounts.'
+ type: boolean
+ secretRef:
+ description: 'secretRef is Optional: secretRef is reference
+ to the secret object containing sensitive information
+ to pass to the plugin scripts. This may be empty if
+ no secret object is specified. If the secret object
+ contains more than one secret, all secrets are passed
+ to the plugin scripts.'
properties:
- gmsaCredentialSpec:
- description: GMSACredentialSpec is where the GMSA
- admission webhook (https://github.com/kubernetes-sigs/windows-gmsa)
- inlines the contents of the GMSA credential spec
- named by the GMSACredentialSpecName field.
- type: string
- gmsaCredentialSpecName:
- description: GMSACredentialSpecName is the name
- of the GMSA credential spec to use.
- type: string
- hostProcess:
- description: HostProcess determines if a container
- should be run as a 'Host Process' container. This
- field is alpha-level and will only be honored
- by components that enable the WindowsHostProcessContainers
- feature flag. Setting this field without the feature
- flag will result in errors when validating the
- Pod. All of a Pod's containers must have the same
- effective HostProcess value (it is not allowed
- to have a mix of HostProcess containers and non-HostProcess
- containers). In addition, if HostProcess is true
- then HostNetwork must also be set to true.
- type: boolean
- runAsUserName:
- description: The UserName in Windows to run the
- entrypoint of the container process. Defaults
- to the user specified in image metadata if unspecified.
- May also be set in PodSecurityContext. If set
- in both SecurityContext and PodSecurityContext,
- the value specified in SecurityContext takes precedence.
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
type: object
+ required:
+ - driver
type: object
- startupProbe:
- description: 'StartupProbe indicates that the Pod has successfully
- initialized. If specified, no other probes are executed
- until this completes successfully. If this probe fails,
- the Pod will be restarted, just as if the livenessProbe
- failed. This can be used to provide different probe parameters
- at the beginning of a Pod''s lifecycle, when it might
- take a long time to load data or warm a cache, than during
- steady-state operation. This cannot be updated. More info:
- https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
+ flocker:
+ description: flocker represents a Flocker volume attached
+ to a kubelet's host machine. This depends on the Flocker
+ control service being running
properties:
- exec:
- description: Exec specifies the action to take.
- properties:
- command:
- description: Command is the command line to execute
- inside the container, the working directory for
- the command is root ('/') in the container's
- filesystem. The command is simply exec'd, it is
- not run inside a shell, so traditional shell instructions
- ('|', etc) won't work. To use a shell, you need
- to explicitly call out to that shell. Exit status
- of 0 is treated as live/healthy and non-zero is
- unhealthy.
- items:
- type: string
- type: array
- type: object
- failureThreshold:
- description: Minimum consecutive failures for the probe
- to be considered failed after having succeeded. Defaults
- to 3. Minimum value is 1.
+ datasetName:
+ description: datasetName is Name of the dataset stored
+ as metadata -> name on the dataset for Flocker should
+ be considered as deprecated
+ type: string
+ datasetUUID:
+ description: datasetUUID is the UUID of the dataset.
+ This is unique identifier of a Flocker dataset
+ type: string
+ type: object
+ gcePersistentDisk:
+ description: 'gcePersistentDisk represents a GCE Disk resource
+ that is attached to a kubelet''s host machine and then
+ exposed to the pod. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
+ properties:
+ fsType:
+ description: 'fsType is filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ partition:
+ description: 'partition is the partition in the volume
+ that you want to mount. If omitted, the default is
+ to mount by volume name. Examples: For volume /dev/sda1,
+ you specify the partition as "1". Similarly, the volume
+ partition for /dev/sda is "0" (or you can leave the
+ property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
format: int32
type: integer
- grpc:
- description: GRPC specifies an action involving a GRPC
- port. This is a beta field and requires enabling GRPCContainerProbe
- feature gate.
+ pdName:
+ description: 'pdName is unique name of the PD resource
+ in GCE. Used to identify the disk in GCE. More info:
+ https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the ReadOnly
+ setting in VolumeMounts. Defaults to false. More info:
+ https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk'
+ type: boolean
+ required:
+ - pdName
+ type: object
+ gitRepo:
+ description: 'gitRepo represents a git repository at a particular
+ revision. DEPRECATED: GitRepo is deprecated. To provision
+ a container with a git repo, mount an EmptyDir into an
+ InitContainer that clones the repo using git, then mount
+ the EmptyDir into the Pod''s container.'
+ properties:
+ directory:
+ description: directory is the target directory name.
+ Must not contain or start with '..'. If '.' is supplied,
+ the volume directory will be the git repository. Otherwise,
+ if specified, the volume will contain the git repository
+ in the subdirectory with the given name.
+ type: string
+ repository:
+ description: repository is the URL
+ type: string
+ revision:
+ description: revision is the commit hash for the specified
+ revision.
+ type: string
+ required:
+ - repository
+ type: object
+ glusterfs:
+ description: 'glusterfs represents a Glusterfs mount on
+ the host that shares a pod''s lifetime. More info: https://examples.k8s.io/volumes/glusterfs/README.md'
+ properties:
+ endpoints:
+ description: 'endpoints is the endpoint name that details
+ Glusterfs topology. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
+ type: string
+ path:
+ description: 'path is the Glusterfs volume path. More
+ info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the Glusterfs
+ volume to be mounted with read-only permissions. Defaults
+ to false. More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod'
+ type: boolean
+ required:
+ - endpoints
+ - path
+ type: object
+ hostPath:
+ description: 'hostPath represents a pre-existing file or
+ directory on the host machine that is directly exposed
+ to the container. This is generally used for system agents
+ or other privileged things that are allowed to see the
+ host machine. Most containers will NOT need this. More
+ info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath
+ --- TODO(jonesdl) We need to restrict who can use host
+ directory mounts and who can/can not mount host directories
+ as read/write.'
+ properties:
+ path:
+ description: 'path of the directory on the host. If
+ the path is a symlink, it will follow the link to
+ the real path. More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath'
+ type: string
+ type:
+ description: 'type for HostPath Volume Defaults to ""
+ More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath'
+ type: string
+ required:
+ - path
+ type: object
+ iscsi:
+ description: 'iscsi represents an ISCSI Disk resource that
+ is attached to a kubelet''s host machine and then exposed
+ to the pod. More info: https://examples.k8s.io/volumes/iscsi/README.md'
+ properties:
+ chapAuthDiscovery:
+ description: chapAuthDiscovery defines whether support
+ iSCSI Discovery CHAP authentication
+ type: boolean
+ chapAuthSession:
+ description: chapAuthSession defines whether support
+ iSCSI Session CHAP authentication
+ type: boolean
+ fsType:
+ description: 'fsType is the filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ initiatorName:
+ description: initiatorName is the custom iSCSI Initiator
+ Name. If initiatorName is specified with iscsiInterface
+ simultaneously, new iSCSI interface <target portal>:<volume
+ name> will be created for the connection.
+ type: string
+ iqn:
+ description: iqn is the target iSCSI Qualified Name.
+ type: string
+ iscsiInterface:
+ description: iscsiInterface is the interface Name that
+ uses an iSCSI transport. Defaults to 'default' (tcp).
+ type: string
+ lun:
+ description: lun represents iSCSI Target Lun number.
+ format: int32
+ type: integer
+ portals:
+ description: portals is the iSCSI Target Portal List.
+ The portal is either an IP or ip_addr:port if the
+ port is other than default (typically TCP ports 860
+ and 3260).
+ items:
+ type: string
+ type: array
+ readOnly:
+ description: readOnly here will force the ReadOnly setting
+ in VolumeMounts. Defaults to false.
+ type: boolean
+ secretRef:
+ description: secretRef is the CHAP Secret for iSCSI
+ target and initiator authentication
properties:
- port:
- description: Port number of the gRPC service. Number
- must be in the range 1 to 65535.
- format: int32
- type: integer
- service:
- description: "Service is the name of the service
- to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).
- \n If this is not specified, the default behavior
- is defined by gRPC."
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- required:
- - port
type: object
- httpGet:
- description: HTTPGet specifies the http request to perform.
- properties:
- host:
- description: Host name to connect to, defaults to
- the pod IP. You probably want to set "Host" in
- httpHeaders instead.
- type: string
- httpHeaders:
- description: Custom headers to set in the request.
- HTTP allows repeated headers.
- items:
- description: HTTPHeader describes a custom header
- to be used in HTTP probes
+ targetPortal:
+ description: targetPortal is iSCSI Target Portal. The
+ Portal is either an IP or ip_addr:port if the port
+ is other than default (typically TCP ports 860 and
+ 3260).
+ type: string
+ required:
+ - iqn
+ - lun
+ - targetPortal
+ type: object
+ name:
+ description: 'name of the volume. Must be a DNS_LABEL and
+ unique within the pod. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
+ type: string
+ nfs:
+ description: 'nfs represents an NFS mount on the host that
+ shares a pod''s lifetime More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ properties:
+ path:
+ description: 'path that is exported by the NFS server.
+ More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the NFS export
+ to be mounted with read-only permissions. Defaults
+ to false. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ type: boolean
+ server:
+ description: 'server is the hostname or IP address of
+ the NFS server. More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs'
+ type: string
+ required:
+ - path
+ - server
+ type: object
+ persistentVolumeClaim:
+ description: 'persistentVolumeClaimVolumeSource represents
+ a reference to a PersistentVolumeClaim in the same namespace.
+ More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
+ properties:
+ claimName:
+ description: 'claimName is the name of a PersistentVolumeClaim
+ in the same namespace as the pod using this volume.
+ More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims'
+ type: string
+ readOnly:
+ description: readOnly Will force the ReadOnly setting
+ in VolumeMounts. Default false.
+ type: boolean
+ required:
+ - claimName
+ type: object
+ photonPersistentDisk:
+ description: photonPersistentDisk represents a PhotonController
+ persistent disk attached and mounted on kubelets host
+ machine
+ properties:
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ pdID:
+ description: pdID is the ID that identifies Photon Controller
+ persistent disk
+ type: string
+ required:
+ - pdID
+ type: object
+ portworxVolume:
+ description: portworxVolume represents a portworx volume
+ attached and mounted on kubelets host machine
+ properties:
+ fsType:
+ description: fSType represents the filesystem type to
+ mount Must be a filesystem type supported by the host
+ operating system. Ex. "ext4", "xfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ readOnly:
+ description: readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ volumeID:
+ description: volumeID uniquely identifies a Portworx
+ volume
+ type: string
+ required:
+ - volumeID
+ type: object
+ projected:
+ description: projected items for all in one resources secrets,
+ configmaps, and downward API
+ properties:
+ defaultMode:
+ description: defaultMode are the mode bits used to set
+ permissions on created files by default. Must be an
+ octal value between 0000 and 0777 or a decimal value
+ between 0 and 511. YAML accepts both octal and decimal
+ values, JSON requires decimal values for mode bits.
+ Directories within the path are not affected by this
+ setting. This might be in conflict with other options
+ that affect the file mode, like fsGroup, and the result
+ can be other mode bits set.
+ format: int32
+ type: integer
+ sources:
+ description: sources is the list of volume projections
+ items:
+ description: Projection that may be projected along
+ with other supported volume types
+ properties:
+ configMap:
+ description: configMap information about the configMap
+ data to project
+ properties:
+ items:
+ description: items if unspecified, each key-value
+ pair in the Data field of the referenced
+ ConfigMap will be projected into the volume
+ as a file whose name is the key and content
+ is the value. If specified, the listed keys
+ will be projected into the specified paths,
+ and unlisted keys will not be present. If
+ a key is specified which is not present
+ in the ConfigMap, the volume setup will
+ error unless it is marked optional. Paths
+ must be relative and may not contain the
+ '..' path or start with '..'.
+ items:
+ description: Maps a string key to a path
+ within a volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode
+ bits used to set permissions on this
+ file. Must be an octal value between
+ 0000 and 0777 or a decimal value between
+ 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires
+ decimal values for mode bits. If not
+ specified, the volume defaultMode
+ will be used. This might be in conflict
+ with other options that affect the
+ file mode, like fsGroup, and the result
+ can be other mode bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path
+ of the file to map the key to. May
+ not be an absolute path. May not contain
+ the path element '..'. May not start
+ with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
+ name:
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion,
+ kind, uid?'
+ type: string
+ optional:
+ description: optional specify whether the
+ ConfigMap or its keys must be defined
+ type: boolean
+ type: object
+ downwardAPI:
+ description: downwardAPI information about the
+ downwardAPI data to project
+ properties:
+ items:
+ description: Items is a list of DownwardAPIVolume
+ file
+ items:
+ description: DownwardAPIVolumeFile represents
+ information to create the file containing
+ the pod field
+ properties:
+ fieldRef:
+ description: 'Required: Selects a field
+ of the pod: only annotations, labels,
+ name and namespace are supported.'
+ properties:
+ apiVersion:
+ description: Version of the schema
+ the FieldPath is written in terms
+ of, defaults to "v1".
+ type: string
+ fieldPath:
+ description: Path of the field to
+ select in the specified API version.
+ type: string
+ required:
+ - fieldPath
+ type: object
+ mode:
+ description: 'Optional: mode bits used
+ to set permissions on this file, must
+ be an octal value between 0000 and
+ 0777 or a decimal value between 0
+ and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal
+ values for mode bits. If not specified,
+ the volume defaultMode will be used.
+ This might be in conflict with other
+ options that affect the file mode,
+ like fsGroup, and the result can be
+ other mode bits set.'
+ format: int32
+ type: integer
+ path:
+ description: 'Required: Path is the
+ relative path name of the file to
+ be created. Must not be absolute or
+ contain the ''..'' path. Must be utf-8
+ encoded. The first item of the relative
+ path must not start with ''..'''
+ type: string
+ resourceFieldRef:
+ description: 'Selects a resource of
+ the container: only resources limits
+ and requests (limits.cpu, limits.memory,
+ requests.cpu and requests.memory)
+ are currently supported.'
+ properties:
+ containerName:
+ description: 'Container name: required
+ for volumes, optional for env
+ vars'
+ type: string
+ divisor:
+ anyOf:
+ - type: integer
+ - type: string
+ description: Specifies the output
+ format of the exposed resources,
+ defaults to "1"
+ pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$
+ x-kubernetes-int-or-string: true
+ resource:
+ description: 'Required: resource
+ to select'
+ type: string
+ required:
+ - resource
+ type: object
+ required:
+ - path
+ type: object
+ type: array
+ type: object
+ secret:
+ description: secret information about the secret
+ data to project
+ properties:
+ items:
+ description: items if unspecified, each key-value
+ pair in the Data field of the referenced
+ Secret will be projected into the volume
+ as a file whose name is the key and content
+ is the value. If specified, the listed keys
+ will be projected into the specified paths,
+ and unlisted keys will not be present. If
+ a key is specified which is not present
+ in the Secret, the volume setup will error
+ unless it is marked optional. Paths must
+ be relative and may not contain the '..'
+ path or start with '..'.
+ items:
+ description: Maps a string key to a path
+ within a volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode
+ bits used to set permissions on this
+ file. Must be an octal value between
+ 0000 and 0777 or a decimal value between
+ 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires
+ decimal values for mode bits. If not
+ specified, the volume defaultMode
+ will be used. This might be in conflict
+ with other options that affect the
+ file mode, like fsGroup, and the result
+ can be other mode bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path
+ of the file to map the key to. May
+ not be an absolute path. May not contain
+ the path element '..'. May not start
+ with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
+ name:
+ description: 'Name of the referent. More info:
+ https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion,
+ kind, uid?'
+ type: string
+ optional:
+ description: optional field specify whether
+ the Secret or its key must be defined
+ type: boolean
+ type: object
+ serviceAccountToken:
+ description: serviceAccountToken is information
+ about the serviceAccountToken data to project
properties:
- name:
- description: The header field name
+ audience:
+ description: audience is the intended audience
+ of the token. A recipient of a token must
+ identify itself with an identifier specified
+ in the audience of the token, and otherwise
+ should reject the token. The audience defaults
+ to the identifier of the apiserver.
type: string
- value:
- description: The header field value
+ expirationSeconds:
+ description: expirationSeconds is the requested
+ duration of validity of the service account
+ token. As the token approaches expiration,
+ the kubelet volume plugin will proactively
+ rotate the service account token. The kubelet
+ will start trying to rotate the token if
+ the token is older than 80 percent of its
+ time to live or if the token is older than
+ 24 hours.Defaults to 1 hour and must be
+ at least 10 minutes.
+ format: int64
+ type: integer
+ path:
+ description: path is the path relative to
+ the mount point of the file to project the
+ token into.
type: string
required:
- - name
- - value
+ - path
type: object
- type: array
- path:
- description: Path to access on the HTTP server.
+ type: object
+ type: array
+ type: object
+ quobyte:
+ description: quobyte represents a Quobyte mount on the host
+ that shares a pod's lifetime
+ properties:
+ group:
+ description: group to map volume access to Default is
+ no group
+ type: string
+ readOnly:
+ description: readOnly here will force the Quobyte volume
+ to be mounted with read-only permissions. Defaults
+ to false.
+ type: boolean
+ registry:
+ description: registry represents a single or multiple
+ Quobyte Registry services specified as a string as
+ host:port pair (multiple entries are separated with
+ commas) which acts as the central registry for volumes
+ type: string
+ tenant:
+ description: tenant owning the given Quobyte volume
+ in the Backend Used with dynamically provisioned Quobyte
+ volumes, value is set by the plugin
+ type: string
+ user:
+ description: user to map volume access to Defaults to
+ serivceaccount user
+ type: string
+ volume:
+ description: volume is a string that references an already
+ created Quobyte volume by name.
+ type: string
+ required:
+ - registry
+ - volume
+ type: object
+ rbd:
+ description: 'rbd represents a Rados Block Device mount
+ on the host that shares a pod''s lifetime. More info:
+ https://examples.k8s.io/volumes/rbd/README.md'
+ properties:
+ fsType:
+ description: 'fsType is the filesystem type of the volume
+ that you want to mount. Tip: Ensure that the filesystem
+ type is supported by the host operating system. Examples:
+ "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4"
+ if unspecified. More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd
+ TODO: how do we prevent errors in the filesystem from
+ compromising the machine'
+ type: string
+ image:
+ description: 'image is the rados image name. More info:
+ https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ keyring:
+ description: 'keyring is the path to key ring for RBDUser.
+ Default is /etc/ceph/keyring. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ monitors:
+ description: 'monitors is a collection of Ceph monitors.
+ More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ items:
+ type: string
+ type: array
+ pool:
+ description: 'pool is the rados pool name. Default is
+ rbd. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ readOnly:
+ description: 'readOnly here will force the ReadOnly
+ setting in VolumeMounts. Defaults to false. More info:
+ https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: boolean
+ secretRef:
+ description: 'secretRef is name of the authentication
+ secret for RBDUser. If provided overrides keyring.
+ Default is nil. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Name or number of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- scheme:
- description: Scheme to use for connecting to the
- host. Defaults to HTTP.
+ type: object
+ user:
+ description: 'user is the rados user name. Default is
+ admin. More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it'
+ type: string
+ required:
+ - image
+ - monitors
+ type: object
+ scaleIO:
+ description: scaleIO represents a ScaleIO persistent volume
+ attached and mounted on Kubernetes nodes.
+ properties:
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Default is "xfs".
+ type: string
+ gateway:
+ description: gateway is the host address of the ScaleIO
+ API Gateway.
+ type: string
+ protectionDomain:
+ description: protectionDomain is the name of the ScaleIO
+ Protection Domain for the configured storage.
+ type: string
+ readOnly:
+ description: readOnly Defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ secretRef:
+ description: secretRef references to the secret for
+ ScaleIO user and other sensitive information. If this
+ is not provided, Login operation will fail.
+ properties:
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- required:
- - port
type: object
- initialDelaySeconds:
- description: 'Number of seconds after the container
- has started before liveness probes are initiated.
- More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
- format: int32
- type: integer
- periodSeconds:
- description: How often (in seconds) to perform the probe.
- Default to 10 seconds. Minimum value is 1.
- format: int32
- type: integer
- successThreshold:
- description: Minimum consecutive successes for the probe
- to be considered successful after having failed. Defaults
- to 1. Must be 1 for liveness and startup. Minimum
- value is 1.
+ sslEnabled:
+ description: sslEnabled Flag enable/disable SSL communication
+ with Gateway, default false
+ type: boolean
+ storageMode:
+ description: storageMode indicates whether the storage
+ for a volume should be ThickProvisioned or ThinProvisioned.
+ Default is ThinProvisioned.
+ type: string
+ storagePool:
+ description: storagePool is the ScaleIO Storage Pool
+ associated with the protection domain.
+ type: string
+ system:
+ description: system is the name of the storage system
+ as configured in ScaleIO.
+ type: string
+ volumeName:
+ description: volumeName is the name of a volume already
+ created in the ScaleIO system that is associated with
+ this volume source.
+ type: string
+ required:
+ - gateway
+ - secretRef
+ - system
+ type: object
+ secret:
+ description: 'secret represents a secret that should populate
+ this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
+ properties:
+ defaultMode:
+ description: 'defaultMode is Optional: mode bits used
+ to set permissions on created files by default. Must
+ be an octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal and
+ decimal values, JSON requires decimal values for mode
+ bits. Defaults to 0644. Directories within the path
+ are not affected by this setting. This might be in
+ conflict with other options that affect the file mode,
+ like fsGroup, and the result can be other mode bits
+ set.'
format: int32
type: integer
- tcpSocket:
- description: TCPSocket specifies an action involving
- a TCP port.
+ items:
+ description: items If unspecified, each key-value pair
+ in the Data field of the referenced Secret will be
+ projected into the volume as a file whose name is
+ the key and content is the value. If specified, the
+ listed keys will be projected into the specified paths,
+ and unlisted keys will not be present. If a key is
+ specified which is not present in the Secret, the
+ volume setup will error unless it is marked optional.
+ Paths must be relative and may not contain the '..'
+ path or start with '..'.
+ items:
+ description: Maps a string key to a path within a
+ volume.
+ properties:
+ key:
+ description: key is the key to project.
+ type: string
+ mode:
+ description: 'mode is Optional: mode bits used
+ to set permissions on this file. Must be an
+ octal value between 0000 and 0777 or a decimal
+ value between 0 and 511. YAML accepts both octal
+ and decimal values, JSON requires decimal values
+ for mode bits. If not specified, the volume
+ defaultMode will be used. This might be in conflict
+ with other options that affect the file mode,
+ like fsGroup, and the result can be other mode
+ bits set.'
+ format: int32
+ type: integer
+ path:
+ description: path is the relative path of the
+ file to map the key to. May not be an absolute
+ path. May not contain the path element '..'.
+ May not start with the string '..'.
+ type: string
+ required:
+ - key
+ - path
+ type: object
+ type: array
+ optional:
+ description: optional field specify whether the Secret
+ or its keys must be defined
+ type: boolean
+ secretName:
+ description: 'secretName is the name of the secret in
+ the pod''s namespace to use. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret'
+ type: string
+ type: object
+ storageos:
+ description: storageOS represents a StorageOS volume attached
+ and mounted on Kubernetes nodes.
+ properties:
+ fsType:
+ description: fsType is the filesystem type to mount.
+ Must be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ readOnly:
+ description: readOnly defaults to false (read/write).
+ ReadOnly here will force the ReadOnly setting in VolumeMounts.
+ type: boolean
+ secretRef:
+ description: secretRef specifies the secret to use for
+ obtaining the StorageOS API credentials. If not specified,
+ default values will be attempted.
properties:
- host:
- description: 'Optional: Host name to connect to,
- defaults to the pod IP.'
+ name:
+ description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names
+ TODO: Add other useful fields. apiVersion, kind,
+ uid?'
type: string
- port:
- anyOf:
- - type: integer
- - type: string
- description: Number or name of the port to access
- on the container. Number must be in the range
- 1 to 65535. Name must be an IANA_SVC_NAME.
- x-kubernetes-int-or-string: true
- required:
- - port
type: object
- terminationGracePeriodSeconds:
- description: Optional duration in seconds the pod needs
- to terminate gracefully upon probe failure. The grace
- period is the duration in seconds after the processes
- running in the pod are sent a termination signal and
- the time when the processes are forcibly halted with
- a kill signal. Set this value longer than the expected
- cleanup time for your process. If this value is nil,
- the pod's terminationGracePeriodSeconds will be used.
- Otherwise, this value overrides the value provided
- by the pod spec. Value must be non-negative integer.
- The value zero indicates stop immediately via the
- kill signal (no opportunity to shut down). This is
- a beta field and requires enabling ProbeTerminationGracePeriod
- feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds
- is used if unset.
- format: int64
- type: integer
- timeoutSeconds:
- description: 'Number of seconds after which the probe
- times out. Defaults to 1 second. Minimum value is
- 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
- format: int32
- type: integer
+ volumeName:
+ description: volumeName is the human-readable name of
+ the StorageOS volume. Volume names are only unique
+ within a namespace.
+ type: string
+ volumeNamespace:
+ description: volumeNamespace specifies the scope of
+ the volume within StorageOS. If no namespace is specified
+ then the Pod's namespace will be used. This allows
+ the Kubernetes name scoping to be mirrored within
+ StorageOS for tighter integration. Set VolumeName
+ to any name to override the default behaviour. Set
+ to "default" if you are not using namespaces within
+ StorageOS. Namespaces that do not pre-exist within
+ StorageOS will be created.
+ type: string
+ type: object
+ vsphereVolume:
+ description: vsphereVolume represents a vSphere volume attached
+ and mounted on kubelets host machine
+ properties:
+ fsType:
+ description: fsType is filesystem type to mount. Must
+ be a filesystem type supported by the host operating
+ system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred
+ to be "ext4" if unspecified.
+ type: string
+ storagePolicyID:
+ description: storagePolicyID is the storage Policy Based
+ Management (SPBM) profile ID associated with the StoragePolicyName.
+ type: string
+ storagePolicyName:
+ description: storagePolicyName is the storage Policy
+ Based Management (SPBM) profile name.
+ type: string
+ volumePath:
+ description: volumePath is the path that identifies
+ vSphere volume vmdk
+ type: string
+ required:
+ - volumePath
type: object
- stdin:
- description: Whether this container should allocate a buffer
- for stdin in the container runtime. If this is not set,
- reads from stdin in the container will always result in
- EOF. Default is false.
- type: boolean
- stdinOnce:
- description: Whether the container runtime should close
- the stdin channel after it has been opened by a single
- attach. When stdin is true the stdin stream will remain
- open across multiple attach sessions. If stdinOnce is
- set to true, stdin is opened on container start, is empty
- until the first client attaches to stdin, and then remains
- open and accepts data until the client disconnects, at
- which time stdin is closed and remains closed until the
- container is restarted. If this flag is false, a container
- processes that reads from stdin will never receive an
- EOF. Default is false
- type: boolean
- terminationMessagePath:
- description: 'Optional: Path at which the file to which
- the container''s termination message will be written is
- mounted into the container''s filesystem. Message written
- is intended to be brief final status, such as an assertion
- failure message. Will be truncated by the node if greater
- than 4096 bytes. The total message length across all containers
- will be limited to 12kb. Defaults to /dev/termination-log.
- Cannot be updated.'
- type: string
- terminationMessagePolicy:
- description: Indicate how the termination message should
- be populated. File will use the contents of terminationMessagePath
- to populate the container status message on both success
- and failure. FallbackToLogsOnError will use the last chunk
- of container log output if the termination message file
- is empty and the container exited with an error. The log
- output is limited to 2048 bytes or 80 lines, whichever
- is smaller. Defaults to File. Cannot be updated.
- type: string
- tty:
- description: Whether this container should allocate a TTY
- for itself, also requires 'stdin' to be true. Default
- is false.
- type: boolean
- volumeDevices:
- description: volumeDevices is the list of block devices
- to be used by the container.
- items:
- description: volumeDevice describes a mapping of a raw
- block device within a container.
- properties:
- devicePath:
- description: devicePath is the path inside of the
- container that the device will be mapped to.
- type: string
- name:
- description: name must match the name of a persistentVolumeClaim
- in the pod
- type: string
- required:
- - devicePath
- - name
- type: object
- type: array
- volumeMounts:
- description: Pod volumes to mount into the container's filesystem.
- Cannot be updated.
- items:
- description: VolumeMount describes a mounting of a Volume
- within a container.
- properties:
- mountPath:
- description: Path within the container at which the
- volume should be mounted. Must not contain ':'.
- type: string
- mountPropagation:
- description: mountPropagation determines how mounts
- are propagated from the host to container and the
- other way around. When not set, MountPropagationNone
- is used. This field is beta in 1.10.
- type: string
- name:
- description: This must match the Name of a Volume.
- type: string
- readOnly:
- description: Mounted read-only if true, read-write
- otherwise (false or unspecified). Defaults to false.
- type: boolean
- subPath:
- description: Path within the volume from which the
- container's volume should be mounted. Defaults to
- "" (volume's root).
- type: string
- subPathExpr:
- description: Expanded path within the volume from
- which the container's volume should be mounted.
- Behaves similarly to SubPath but environment variable
- references $(VAR_NAME) are expanded using the container's
- environment. Defaults to "" (volume's root). SubPathExpr
- and SubPath are mutually exclusive.
- type: string
- required:
- - mountPath
- - name
- type: object
- type: array
- workingDir:
- description: Container's working directory. If not specified,
- the container runtime's default will be used, which might
- be configured in the container image. Cannot be updated.
- type: string
required:
- name
type: object
diff --git a/charts/redisoperator/values.yaml b/charts/redisoperator/values.yaml
index 9d6d704599ca78d87e9745e5332ba67b2e4c6d68..dbc1449138c803810567fcf9f0ee1b462ce58730 100644
--- a/charts/redisoperator/values.yaml
+++ b/charts/redisoperator/values.yaml
@@ -5,8 +5,8 @@
# Name of the image repository to pull the container image from.
image:
repository: quay.io/spotahome/redis-operator
- pullPolicy: Always
- tag: v1.1.1
+ pullPolicy: IfNotPresent
+ tag: v1.2.0
imageCredentials:
create: false
diff --git a/manifests/kustomize/components/version/kustomization.yaml b/manifests/kustomize/components/version/kustomization.yaml
index bc36f10f4945cecf68d8299e8ed9100ac578fbd1..49eaffc2a2e53444a4f7e64c3ec6da63d4827ffd 100644
--- a/manifests/kustomize/components/version/kustomization.yaml
+++ b/manifests/kustomize/components/version/kustomization.yaml
@@ -3,8 +3,8 @@ kind: Component
labels:
- pairs:
- app.kubernetes.io/version: 1.1.1
+ app.kubernetes.io/version: 1.2.0
images:
- name: quay.io/spotahome/redis-operator
- newTag: v1.1.1
+ newTag: v1.2.0