0prometheus-operator-0prometheusCustomResourceDefinition.yaml

                        properties:
                          host:
                            description: 'Optional: Host name to connect to, defaults
                              to the pod IP.'
                            type: string
                          port: {}
                        required:
                        - port
                      timeoutSeconds:
                        description: 'Number of seconds after which the probe times
                          out. Defaults to 1 second. Minimum value is 1. More info:
                          https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                        format: int32
                        type: integer
                  name:
                    description: Name of the container specified as a DNS_LABEL. Each
                      container in a pod must have a unique name (DNS_LABEL). Cannot
                      be updated.
                    type: string
                  ports:
                    description: List of ports to expose from the container. Exposing
                      a port here gives the system additional information about the
                      network connections a container uses, but is primarily informational.
                      Not specifying a port here DOES NOT prevent that port from being
                      exposed. Any port which is listening on the default "0.0.0.0"
                      address inside a container will be accessible from the network.
                      Cannot be updated.
                    items:
                      description: ContainerPort represents a network port in a single
                        container.
                      properties:
                        containerPort:
                          description: Number of port to expose on the pod's IP address.
                            This must be a valid port number, 0 < x < 65536.
                          format: int32
                          type: integer
                        hostIP:
                          description: What host IP to bind the external port to.
                          type: string
                        hostPort:
                          description: Number of port to expose on the host. If specified,
                            this must be a valid port number, 0 < x < 65536. If HostNetwork
                            is specified, this must match ContainerPort. Most containers
                            do not need this.
                          format: int32
                          type: integer
                        name:
                          description: If specified, this must be an IANA_SVC_NAME
                            and unique within the pod. Each named port in a pod must
                            have a unique name. Name for the port that can be referred
                            to by services.
                          type: string
                        protocol:
                          description: Protocol for port. Must be UDP or TCP. Defaults
                            to "TCP".
                          type: string
                      required:
                      - containerPort
                    type: array
                  readinessProbe:
                    description: Probe describes a health check to be performed against
                      a container to determine whether it is alive or ready to receive
                      traffic.
                    properties:
                      exec:
                        description: ExecAction describes a "run in container" action.
                        properties:
                          command:
                            description: Command is the command line to execute inside
                              the container, the working directory for the command  is
                              root ('/') in the container's filesystem. The command
                              is simply exec'd, it is not run inside a shell, so traditional
                              shell instructions ('|', etc) won't work. To use a shell,
                              you need to explicitly call out to that shell. Exit
                              status of 0 is treated as live/healthy and non-zero
                              is unhealthy.
                            items:
                              type: string
                            type: array
                      failureThreshold:
                        description: Minimum consecutive failures for the probe to
                          be considered failed after having succeeded. Defaults to
                          3. Minimum value is 1.
                        format: int32
                        type: integer
                      httpGet:
                        description: HTTPGetAction describes an action based on HTTP
                          Get requests.
                        properties:
                          host:
                            description: Host name to connect to, defaults to the
                              pod IP. You probably want to set "Host" in httpHeaders
                              instead.
                            type: string
                          httpHeaders:
                            description: Custom headers to set in the request. HTTP
                              allows repeated headers.
                            items:
                              description: HTTPHeader describes a custom header to
                                be used in HTTP probes
                              properties:
                                name:
                                  description: The header field name
                                  type: string
                                value:
                                  description: The header field value
                                  type: string
                              required:
                              - name
                              - value
                            type: array
                          path:
                            description: Path to access on the HTTP server.
                            type: string
                          port: {}
                          scheme:
                            description: Scheme to use for connecting to the host.
                              Defaults to HTTP.
                            type: string
                        required:
                        - port
                      initialDelaySeconds:
                        description: 'Number of seconds after the container has started
                          before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                        format: int32
                        type: integer
                      periodSeconds:
                        description: How often (in seconds) to perform the probe.
                          Default to 10 seconds. Minimum value is 1.
                        format: int32
                        type: integer
                      successThreshold:
                        description: Minimum consecutive successes for the probe to
                          be considered successful after having failed. Defaults to
                          1. Must be 1 for liveness. Minimum value is 1.
                        format: int32
                        type: integer
                      tcpSocket:
                        description: TCPSocketAction describes an action based on
                          opening a socket
                        properties:
                          host:
                            description: 'Optional: Host name to connect to, defaults
                              to the pod IP.'
                            type: string
                          port: {}
                        required:
                        - port
                      timeoutSeconds:
                        description: 'Number of seconds after which the probe times
                          out. Defaults to 1 second. Minimum value is 1. More info:
                          https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes'
                        format: int32
                        type: integer
                  resources:
                    description: ResourceRequirements describes the compute resource
                      requirements.
                    properties:
                      limits:
                        description: 'Limits describes the maximum amount of compute
                          resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/'
                        type: object
                      requests:
                        description: 'Requests describes the minimum amount of compute
                          resources required. If Requests is omitted for a container,
                          it defaults to Limits if that is explicitly specified, otherwise
                          to an implementation-defined value. More info: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/'
                        type: object
                  securityContext:
                    description: SecurityContext holds security configuration that
                      will be applied to a container. Some fields are present in both
                      SecurityContext and PodSecurityContext.  When both are set,
                      the values in SecurityContext take precedence.
                    properties:
                      allowPrivilegeEscalation:
                        description: 'AllowPrivilegeEscalation controls whether a
                          process can gain more privileges than its parent process.
                          This bool directly controls if the no_new_privs flag will
                          be set on the container process. AllowPrivilegeEscalation
                          is true always when the container is: 1) run as Privileged
                          2) has CAP_SYS_ADMIN'
                        type: boolean
                      capabilities:
                        description: Adds and removes POSIX capabilities from running
                          containers.
                        properties:
                          add:
                            description: Added capabilities
                            items:
                              type: string
                            type: array
                          drop:
                            description: Removed capabilities
                            items:
                              type: string
                            type: array
                      privileged:
                        description: Run container in privileged mode. Processes in
                          privileged containers are essentially equivalent to root
                          on the host. Defaults to false.
                        type: boolean
                      readOnlyRootFilesystem:
                        description: Whether this container has a read-only root filesystem.
                          Default is false.
                        type: boolean
                      runAsGroup:
                        description: The GID to run the entrypoint of the container
                          process. Uses runtime default if unset. May also be set
                          in PodSecurityContext.  If set in both SecurityContext and
                          PodSecurityContext, the value specified in SecurityContext
                          takes precedence.
                        format: int64
                        type: integer
                      runAsNonRoot:
                        description: Indicates that the container must run as a non-root
                          user. If true, the Kubelet will validate the image at runtime
                          to ensure that it does not run as UID 0 (root) and fail
                          to start the container if it does. If unset or false, no
                          such validation will be performed. May also be set in PodSecurityContext.  If
                          set in both SecurityContext and PodSecurityContext, the
                          value specified in SecurityContext takes precedence.
                        type: boolean
                      runAsUser:
                        description: The UID to run the entrypoint of the container
                          process. Defaults to user specified in image metadata if
                          unspecified. May also be set in PodSecurityContext.  If
                          set in both SecurityContext and PodSecurityContext, the
                          value specified in SecurityContext takes precedence.
                        format: int64
                        type: integer
                      seLinuxOptions:
                        description: SELinuxOptions are the labels to be applied to
                          the container
                        properties:
                          level:
                            description: Level is SELinux level label that applies
                              to the container.
                            type: string
                          role:
                            description: Role is a SELinux role label that applies
                              to the container.
                            type: string
                          type:
                            description: Type is a SELinux type label that applies
                              to the container.
                            type: string
                          user:
                            description: User is a SELinux user label that applies
                              to the container.
                            type: string
                  stdin:
                    description: Whether this container should allocate a buffer for
                      stdin in the container runtime. If this is not set, reads from
                      stdin in the container will always result in EOF. Default is
                      false.
                    type: boolean
                  stdinOnce:
                    description: Whether the container runtime should close the stdin
                      channel after it has been opened by a single attach. When stdin
                      is true the stdin stream will remain open across multiple attach
                      sessions. If stdinOnce is set to true, stdin is opened on container
                      start, is empty until the first client attaches to stdin, and
                      then remains open and accepts data until the client disconnects,
                      at which time stdin is closed and remains closed until the container
                      is restarted. If this flag is false, a container processes that
                      reads from stdin will never receive an EOF. Default is false
                    type: boolean
                  terminationMessagePath:
                    description: 'Optional: Path at which the file to which the container''s
                      termination message will be written is mounted into the container''s
                      filesystem. Message written is intended to be brief final status,
                      such as an assertion failure message. Will be truncated by the
                      node if greater than 4096 bytes. The total message length across
                      all containers will be limited to 12kb. Defaults to /dev/termination-log.
                      Cannot be updated.'
                    type: string
                  terminationMessagePolicy:
                    description: Indicate how the termination message should be populated.
                      File will use the contents of terminationMessagePath to populate
                      the container status message on both success and failure. FallbackToLogsOnError
                      will use the last chunk of container log output if the termination
                      message file is empty and the container exited with an error.
                      The log output is limited to 2048 bytes or 80 lines, whichever
                      is smaller. Defaults to File. Cannot be updated.
                    type: string
                  tty:
                    description: Whether this container should allocate a TTY for
                      itself, also requires 'stdin' to be true. Default is false.
                    type: boolean
                  volumeDevices:
                    description: volumeDevices is the list of block devices to be
                      used by the container. This is an alpha feature and may change
                      in the future.
                    items:
                      description: volumeDevice describes a mapping of a raw block
                        device within a container.
                      properties:
                        devicePath:
                          description: devicePath is the path inside of the container
                            that the device will be mapped to.
                          type: string
                        name:
                          description: name must match the name of a persistentVolumeClaim
                            in the pod
                          type: string
                      required:
                      - name
                      - devicePath
                    type: array
                  volumeMounts:
                    description: Pod volumes to mount into the container's filesystem.
                      Cannot be updated.
                    items:
                      description: VolumeMount describes a mounting of a Volume within
                        a container.
                      properties:
                        mountPath:
                          description: Path within the container at which the volume
                            should be mounted.  Must not contain ':'.
                          type: string
                        mountPropagation:
                          description: mountPropagation determines how mounts are
                            propagated from the host to container and the other way
                            around. When not set, MountPropagationHostToContainer
                            is used. This field is beta in 1.10.
                          type: string
                        name:
                          description: This must match the Name of a Volume.
                          type: string
                        readOnly:
                          description: Mounted read-only if true, read-write otherwise
                            (false or unspecified). Defaults to false.
                          type: boolean
                        subPath:
                          description: Path within the volume from which the container's
                            volume should be mounted. Defaults to "" (volume's root).
                          type: string
                      required:
                      - name
                      - mountPath
                    type: array
                  workingDir:
                    description: Container's working directory. If not specified,
                      the container runtime's default will be used, which might be
                      configured in the container image. Cannot be updated.
                    type: string
                required:
                - name
              type: array
            evaluationInterval:
              description: Interval between consecutive evaluations.
              type: string
            externalLabels:
              description: The labels to add to any time series or alerts when communicating
                with external systems (federation, remote storage, Alertmanager).
              type: object
            externalUrl:
              description: The external URL the Prometheus instances will be available
                under. This is necessary to generate correct URLs. This is necessary
                if Prometheus is not served from root of a DNS name.
              type: string
            imagePullSecrets:
              description: An optional list of references to secrets in the same namespace
                to use for pulling prometheus and alertmanager images from registries
                see http://kubernetes.io/docs/user-guide/images#specifying-imagepullsecrets-on-a-pod
              items:
                description: LocalObjectReference contains enough information to let
                  you locate the referenced object inside the same namespace.
                properties:
                  name:
                    description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
                    type: string
              type: array
            listenLocal:
              description: ListenLocal makes the Prometheus server listen on loopback,
                so that it does not bind against the Pod IP.
              type: boolean
            logLevel:
              description: Log level for Prometheus to be configured with.
              type: string
            nodeSelector:
              description: Define which Nodes the Pods are scheduled on.
              type: object
            paused:
              description: When a Prometheus deployment is paused, no actions except
                for deletion will be performed on the underlying objects.
              type: boolean
            podMetadata:
              description: ObjectMeta is metadata that all persisted resources must
                have, which includes all objects users must create.
              properties:
                annotations:
                  description: 'Annotations is an unstructured key value map stored
                    with a resource that may be set by external tools to store and
                    retrieve arbitrary metadata. They are not queryable and should
                    be preserved when modifying objects. More info: http://kubernetes.io/docs/user-guide/annotations'
                  type: object
                clusterName:
                  description: The name of the cluster which the object belongs to.
                    This is used to distinguish resources with same name and namespace
                    in different clusters. This field is not set anywhere right now
                    and apiserver is going to ignore it if set in create or update
                    request.
                  type: string
                creationTimestamp:
                  format: date-time
                  type: string
                deletionGracePeriodSeconds:
                  description: Number of seconds allowed for this object to gracefully
                    terminate before it will be removed from the system. Only set
                    when deletionTimestamp is also set. May only be shortened. Read-only.
                  format: int64
                  type: integer
                deletionTimestamp:
                  format: date-time
                  type: string
                finalizers:
                  description: Must be empty before the object is deleted from the
                    registry. Each entry is an identifier for the responsible component
                    that will remove the entry from the list. If the deletionTimestamp
                    of the object is non-nil, entries in this list can only be removed.
                  items:
                    type: string
                  type: array
                generateName:
                  description: |-
                    GenerateName is an optional prefix, used by the server, to generate a unique name ONLY IF the Name field has not been provided. If this field is used, the name returned to the client will be different than the name passed. This value will also be combined with a unique suffix. The provided value has the same validation rules as the Name field, and may be truncated by the length of the suffix required to make the value unique on the server.

                    If this field is specified and the generated name exists, the server will NOT return a 409 - instead, it will either return 201 Created or 500 with Reason ServerTimeout indicating a unique name could not be found in the time allotted, and the client should retry (optionally after the time indicated in the Retry-After header).

                    Applied only if Name is not specified. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#idempotency
                  type: string
                generation:
                  description: A sequence number representing a specific generation
                    of the desired state. Populated by the system. Read-only.
                  format: int64
                  type: integer
                initializers:
                  description: Initializers tracks the progress of initialization.
                  properties:
                    pending:
                      description: Pending is a list of initializers that must execute
                        in order before this object is visible. When the last pending
                        initializer is removed, and no failing result is set, the
                        initializers struct will be set to nil and the object is considered
                        as initialized and visible to all clients.
                      items:
                        description: Initializer is information about an initializer
                          that has not yet completed.
                        properties:
                          name:
                            description: name of the process that is responsible for
                              initializing this object.
                            type: string
                        required:
                        - name
                      type: array
                    result:
                      description: Status is a return value for calls that don't return
                        other objects.
                      properties:
                        apiVersion:
                          description: 'APIVersion defines the versioned schema of
                            this representation of an object. Servers should convert
                            recognized schemas to the latest internal value, and may
                            reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#resources'
                          type: string
                        code:
                          description: Suggested HTTP return code for this status,
                            0 if not set.
                          format: int32
                          type: integer
                        details:
                          description: StatusDetails is a set of additional properties
                            that MAY be set by the server to provide additional information
                            about a response. The Reason field of a Status object
                            defines what attributes will be set. Clients must ignore
                            fields that do not match the defined type of each attribute,
                            and should assume that any attribute may be empty, invalid,
                            or under defined.
                          properties:
                            causes:
                              description: The Causes array includes more details
                                associated with the StatusReason failure. Not all
                                StatusReasons may provide detailed causes.
                              items:
                                description: StatusCause provides more information
                                  about an api.Status failure, including cases when
                                  multiple errors are encountered.
                                properties:
                                  field:
                                    description: |-
                                      The field of the resource that has caused this error, as named by its JSON serialization. May include dot and postfix notation for nested attributes. Arrays are zero-indexed.  Fields may appear more than once in an array of causes due to fields having multiple errors. Optional.

                                      Examples:
                                        "name" - the field "name" on the current resource
                                        "items[0].name" - the field "name" on the first array entry in "items"
                                    type: string
                                  message:
                                    description: A human-readable description of the
                                      cause of the error.  This field may be presented
                                      as-is to a reader.
                                    type: string
                                  reason:
                                    description: A machine-readable description of
                                      the cause of the error. If this value is empty
                                      there is no information available.
                                    type: string
                              type: array
                            group:
                              description: The group attribute of the resource associated
                                with the status StatusReason.
                              type: string
                            kind:
                              description: 'The kind attribute of the resource associated
                                with the status StatusReason. On some operations may
                                differ from the requested resource Kind. More info:
                                https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds'
                              type: string
                            name:
                              description: The name attribute of the resource associated
                                with the status StatusReason (when there is a single
                                name which can be described).
                              type: string
                            retryAfterSeconds:
                              description: If specified, the time in seconds before
                                the operation should be retried. Some errors may indicate
                                the client must take an alternate action - for those
                                errors this field may indicate how long to wait before
                                taking the alternate action.
                              format: int32
                              type: integer
                            uid:
                              description: 'UID of the resource. (when there is a
                                single resource which can be described). More info:
                                http://kubernetes.io/docs/user-guide/identifiers#uids'
                              type: string
                        kind:
                          description: 'Kind is a string value representing the REST
                            resource this object represents. Servers may infer this
                            from the endpoint the client submits requests to. Cannot
                            be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds'
                          type: string
                        message:
                          description: A human-readable description of the status
                            of this operation.
                          type: string
                        metadata:
                          description: ListMeta describes metadata that synthetic
                            resources must have, including lists and various status
                            objects. A resource may have only one of {ObjectMeta,
                            ListMeta}.
                          properties:
                            continue:
                              description: continue may be set if the user set a limit
                                on the number of items returned, and indicates that
                                the server has more data available. The value is opaque
                                and may be used to issue another request to the endpoint
                                that served this list to retrieve the next set of
                                available objects. Continuing a list may not be possible
                                if the server configuration has changed or more than
                                a few minutes have passed. The resourceVersion field
                                returned when using this continue value will be identical
                                to the value in the first response.
                              type: string
                            resourceVersion:
                              description: 'String that identifies the server''s internal
                                version of this object that can be used by clients
                                to determine when objects have changed. Value must
                                be treated as opaque by clients and passed unmodified
                                back to the server. Populated by the system. Read-only.
                                More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#concurrency-control-and-consistency'
                              type: string
                            selfLink:
                              description: selfLink is a URL representing this object.
                                Populated by the system. Read-only.
                              type: string
                        reason:
                          description: A machine-readable description of why this
                            operation is in the "Failure" status. If this value is
                            empty there is no information available. A Reason clarifies
                            an HTTP status code but does not override it.
                          type: string
                        status:
                          description: 'Status of the operation. One of: "Success"
                            or "Failure". More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#spec-and-status'
                          type: string
                  required:
                  - pending
                labels:
                  description: 'Map of string keys and values that can be used to
                    organize and categorize (scope and select) objects. May match
                    selectors of replication controllers and services. More info:
                    http://kubernetes.io/docs/user-guide/labels'
                  type: object
                name:
                  description: 'Name must be unique within a namespace. Is required
                    when creating resources, although some resources may allow a client
                    to request the generation of an appropriate name automatically.
                    Name is primarily intended for creation idempotence and configuration
                    definition. Cannot be updated. More info: http://kubernetes.io/docs/user-guide/identifiers#names'
                  type: string
                namespace:
                  description: |-
                    Namespace defines the space within each name must be unique. An empty namespace is equivalent to the "default" namespace, but "default" is the canonical representation. Not all objects are required to be scoped to a namespace - the value of this field for those objects will be empty.

                    Must be a DNS_LABEL. Cannot be updated. More info: http://kubernetes.io/docs/user-guide/namespaces
                  type: string
                ownerReferences:
                  description: List of objects depended by this object. If ALL objects
                    in the list have been deleted, this object will be garbage collected.
                    If this object is managed by a controller, then an entry in this
                    list will point to this controller, with the controller field
                    set to true. There cannot be more than one managing controller.
                  items:
                    description: OwnerReference contains enough information to let
                      you identify an owning object. Currently, an owning object must
                      be in the same namespace, so there is no namespace field.
                    properties:
                      apiVersion:
                        description: API version of the referent.
                        type: string
                      blockOwnerDeletion:
                        description: If true, AND if the owner has the "foregroundDeletion"
                          finalizer, then the owner cannot be deleted from the key-value
                          store until this reference is removed. Defaults to false.
                          To set this field, a user needs "delete" permission of the
                          owner, otherwise 422 (Unprocessable Entity) will be returned.
                        type: boolean
                      controller:
                        description: If true, this reference points to the managing
                          controller.
                        type: boolean
                      kind:
                        description: 'Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#types-kinds'
                        type: string
                      name:
                        description: 'Name of the referent. More info: http://kubernetes.io/docs/user-guide/identifiers#names'
                        type: string
                      uid:
                        description: 'UID of the referent. More info: http://kubernetes.io/docs/user-guide/identifiers#uids'
                        type: string
                    required:
                    - apiVersion
                    - kind
                    - name
                    - uid
                  type: array
                resourceVersion:
                  description: |-
                    An opaque value that represents the internal version of this object that can be used by clients to determine when objects have changed. May be used for optimistic concurrency, change detection, and the watch operation on a resource or set of resources. Clients must treat these values as opaque and passed unmodified back to the server. They may only be valid for a particular resource or set of resources.

                    Populated by the system. Read-only. Value must be treated as opaque by clients and . More info: https://git.k8s.io/community/contributors/devel/api-conventions.md#concurrency-control-and-consistency
                  type: string
                selfLink:
                  description: SelfLink is a URL representing this object. Populated
                    by the system. Read-only.
                  type: string
                uid:
                  description: |-
                    UID is the unique in time and space value for this object. It is typically generated by the server on successful creation of a resource and is not allowed to change on PUT operations.

                    Populated by the system. Read-only. More info: http://kubernetes.io/docs/user-guide/identifiers#uids
                  type: string
            remoteRead:
              description: If specified, the remote_read spec. This is an experimental
                feature, it may change in any upcoming release in a breaking way.
              items:
                description: RemoteReadSpec defines the remote_read configuration
                  for prometheus.
                properties:
                  basicAuth:
                    description: 'BasicAuth allow an endpoint to authenticate over
                      basic authentication More info: https://prometheus.io/docs/operating/configuration/#endpoints'
                    properties:
                      password:
                        description: SecretKeySelector selects a key of a Secret.
                        properties:
                          key:
                            description: The key of the secret to select from.  Must
                              be a valid secret key.
                            type: string
                          name:
                            description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
                            type: string
                          optional:
                            description: Specify whether the Secret or it's key must
                              be defined
                            type: boolean
                        required:
                        - key
                      username:
                        description: SecretKeySelector selects a key of a Secret.
                        properties:
                          key:
                            description: The key of the secret to select from.  Must
                              be a valid secret key.
                            type: string
                          name:
                            description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
                            type: string
                          optional:
                            description: Specify whether the Secret or it's key must
                              be defined
                            type: boolean
                        required:
                        - key
                  bearerToken:
                    description: bearer token for remote read.
                    type: string
                  bearerTokenFile:
                    description: File to read bearer token for remote read.
                    type: string
                  proxyUrl:
                    description: Optional ProxyURL
                    type: string
                  readRecent:
                    description: Whether reads should be made for queries for time
                      ranges that the local storage should have complete data for.
                    type: boolean
                  remoteTimeout:
                    description: Timeout for requests to the remote read endpoint.
                    type: string
                  requiredMatchers:
                    description: An optional list of equality matchers which have
                      to be present in a selector to query the remote read endpoint.
                    type: object
                  tlsConfig:
                    description: TLSConfig specifies TLS configuration parameters.
                    properties:
                      caFile:
                        description: The CA cert to use for the targets.
                        type: string
                      certFile:
                        description: The client cert file for the targets.
                        type: string
                      insecureSkipVerify:
                        description: Disable target certificate validation.
                        type: boolean
                      keyFile:
                        description: The client key file for the targets.
                        type: string
                      serverName:
                        description: Used to verify the hostname for the targets.
                        type: string
                  url:
                    description: The URL of the endpoint to send samples to.
                    type: string
                required:
                - url
              type: array
            remoteWrite:
              description: If specified, the remote_write spec. This is an experimental
                feature, it may change in any upcoming release in a breaking way.
              items:
                description: RemoteWriteSpec defines the remote_write configuration
                  for prometheus.
                properties:
                  basicAuth:
                    description: 'BasicAuth allow an endpoint to authenticate over
                      basic authentication More info: https://prometheus.io/docs/operating/configuration/#endpoints'
                    properties:
                      password:
                        description: SecretKeySelector selects a key of a Secret.
                        properties:
                          key:
                            description: The key of the secret to select from.  Must
                              be a valid secret key.
                            type: string
                          name:
                            description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
                            type: string
                          optional:
                            description: Specify whether the Secret or it's key must
                              be defined
                            type: boolean
                        required:
                        - key
                      username:
                        description: SecretKeySelector selects a key of a Secret.
                        properties:
                          key:
                            description: The key of the secret to select from.  Must
                              be a valid secret key.
                            type: string
                          name:
                            description: 'Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names'
                            type: string
                          optional:
                            description: Specify whether the Secret or it's key must
                              be defined
                            type: boolean
                        required:
                        - key
                  bearerToken:
                    description: File to read bearer token for remote write.
                    type: string
                  bearerTokenFile:
                    description: File to read bearer token for remote write.
                    type: string
                  proxyUrl:
                    description: Optional ProxyURL
                    type: string
                  queueConfig:
                    description: QueueConfig allows the tuning of remote_write queue_config
                      parameters. This object is referenced in the RemoteWriteSpec
                      object.
                    properties:
                      batchSendDeadline:
                        description: BatchSendDeadline is the maximum time a sample
                          will wait in buffer.
                        type: string
                      capacity:
                        description: Capacity is the number of samples to buffer per
                          shard before we start dropping them.
                        format: int32
                        type: integer
                      maxBackoff:
                        description: MaxBackoff is the maximum retry delay.
                        type: string
                      maxRetries:
                        description: MaxRetries is the maximum number of times to
                          retry a batch on recoverable errors.
                        format: int32
                        type: integer
                      maxSamplesPerSend:
                        description: MaxSamplesPerSend is the maximum number of samples
                          per send.
                        format: int32
                        type: integer
                      maxShards:
                        description: MaxShards is the maximum number of shards, i.e.
                          amount of concurrency.
                        format: int32
                        type: integer
                      minBackoff:
                        description: MinBackoff is the initial retry delay. Gets doubled
                          for every retry.
                        type: string
                  remoteTimeout:
                    description: Timeout for requests to the remote write endpoint.
                    type: string
                  tlsConfig:
                    description: TLSConfig specifies TLS configuration parameters.
                    properties:
                      caFile:
                        description: The CA cert to use for the targets.
                        type: string
                      certFile:
                        description: The client cert file for the targets.
                        type: string
                      insecureSkipVerify:
                        description: Disable target certificate validation.
                        type: boolean
                      keyFile:
                        description: The client key file for the targets.
                        type: string
                      serverName:
                        description: Used to verify the hostname for the targets.
                        type: string
                  url:
                    description: The URL of the endpoint to send samples to.
                    type: string
                  writeRelabelConfigs:
                    description: The list of remote write relabel configurations.
                    items:
                      description: 'RelabelConfig allows dynamic rewriting of the
                        label set, being applied to samples before ingestion. It defines
                        `<metric_relabel_configs>`-section of Prometheus configuration.
                        More info: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#metric_relabel_configs'
                      properties:
                        action:
                          description: Action to perform based on regex matching.
                            Default is 'replace'
                          type: string
                        modulus:
                          description: Modulus to take of the hash of the source label
                            values.
                          format: int64
                          type: integer
                        regex:
                          description: Regular expression against which the extracted
                            value is matched. defailt is '(.*)'
                          type: string
                        replacement:
                          description: Replacement value against which a regex replace
                            is performed if the regular expression matches. Regex
                            capture groups are available. Default is '$1'
                          type: string
                        separator:
                          description: Separator placed between concatenated source
                            label values. default is ';'.
                          type: string
                        sourceLabels:
                          description: The source labels select values from existing
                            labels. Their content is concatenated using the configured
                            separator and matched against the configured regular expression
                            for the replace, keep, and drop actions.
                          items:
                            type: string
                          type: array
                        targetLabel:
                          description: Label to which the resulting value is written
                            in a replace action. It is mandatory for replace actions.
                            Regex capture groups are available.
                          type: string
                    type: array
                required:
                - url
              type: array
            replicas:
              description: Number of instances to deploy for a Prometheus deployment.
              format: int32
              type: integer
            resources:
              description: ResourceRequirements describes the compute resource requirements.
              properties:
                limits:
                  description: 'Limits describes the maximum amount of compute resources
                    allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/'
                  type: object
                requests:
                  description: 'Requests describes the minimum amount of compute resources
                    required. If Requests is omitted for a container, it defaults
                    to Limits if that is explicitly specified, otherwise to an implementation-defined
                    value. More info: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/'
                  type: object
            retention:
              description: Time duration Prometheus shall retain data for.
              type: string
            routePrefix:
              description: The route prefix Prometheus registers HTTP handlers for.
                This is useful, if using ExternalURL and a proxy is rewriting HTTP
                routes of a request, and the actual ExternalURL is still true, but
                the server serves requests under a different route prefix. For example
                for use with `kubectl proxy`.
              type: string
            ruleNamespaceSelector:
              description: A label selector is a label query over a set of resources.
                The result of matchLabels and matchExpressions are ANDed. An empty
                label selector matches all objects. A null label selector matches
                no objects.
              properties:
                matchExpressions:
                  description: matchExpressions is a list of label selector requirements.
                    The requirements are ANDed.
                  items:
                    description: A label selector requirement is a selector that contains
                      values, a key, and an operator that relates the key and values.
                    properties:
                      key:
                        description: key is the label key that the selector applies
                          to.
                        type: string
                      operator:
                        description: operator represents a key's relationship to a
                          set of values. Valid operators are In, NotIn, Exists and
                          DoesNotExist.
                        type: string
                      values:
                        description: values is an array of string values. If the operator
                          is In or NotIn, the values array must be non-empty. If the
                          operator is Exists or DoesNotExist, the values array must
                          be empty. This array is replaced during a strategic merge
                          patch.
                        items:
                          type: string
                        type: array
                    required:
                    - key
                    - operator
                  type: array
                matchLabels:
                  description: matchLabels is a map of {key,value} pairs. A single
                    {key,value} in the matchLabels map is equivalent to an element
                    of matchExpressions, whose key field is "key", the operator is
                    "In", and the values array contains only "value". The requirements
                    are ANDed.
                  type: object
            ruleSelector:
              description: A label selector is a label query over a set of resources.
                The result of matchLabels and matchExpressions are ANDed. An empty
                label selector matches all objects. A null label selector matches
                no objects.
              properties:
                matchExpressions:
                  description: matchExpressions is a list of label selector requirements.
                    The requirements are ANDed.
                  items:
                    description: A label selector requirement is a selector that contains
                      values, a key, and an operator that relates the key and values.
                    properties:
                      key:
                        description: key is the label key that the selector applies
                          to.
                        type: string
                      operator:
                        description: operator represents a key's relationship to a
                          set of values. Valid operators are In, NotIn, Exists and
                          DoesNotExist.